Posted: Sun Sep 11, 2005 5:59 pm
try course grade sandpaper then work down to finer grades and finish with some metal polish
mate.... well done
Page 1 of 1
hi
Posted: Sun Sep 11, 2005 7:30 pm
your inlet maifold came up very nice tho
mate.... well done
mate.... well done
Posted: Sun Sep 11, 2005 7:36 pm
Tng, are you from Norwich mate?
Posted: Mon Sep 12, 2005 11:47 am
you won't have seen my car "the other day" as I live in York, but i'm sure I spotted your car a couple of months back coming out of Sweetbriar Ind Est at the lights as I turned in. Was going to L&R Motor Factors for some bits (old fella has an account there 
)
I generally visit Norwich once a month as I have family there, will have to catch up one time
)I generally visit Norwich once a month as I have family there, will have to catch up one time
Posted: Mon Sep 12, 2005 1:24 pm
try a bit of mister muscle oven cleaner, i found it better than a degreaser like gunk.
Posted: Mon Sep 12, 2005 3:35 pm
there's a guy who's just joined up who lives in Spixworth too, so a few more zoners around there now. There's a few through in Ispwich too and Kings Lynn also.
Will prob be down early october so I'll PM you nearer the time mate
Will prob be down early october so I'll PM you nearer the time mate
Posted: Mon Sep 12, 2005 9:25 pm
This guy spent HOURS and hours sanding his cover.
Result... http://www.villagephotos.com/pubbrowse. ... id=1441859
Result... http://www.villagephotos.com/pubbrowse. ... id=1441859
Posted: Tue Sep 13, 2005 8:25 am
elliot wrote:try a bit of mister muscle oven cleaner, i found it better than a degreaser like gunk.
does that really work?Posted: Tue Sep 13, 2005 10:31 am
sure does matey, did it on mine. it goes a bit manky when the foam has dried but after a bit of hose and sponge action, looks greatHyperion wrote:elliot wrote:try a bit of mister muscle oven cleaner, i found it better than a degreaser like gunk.
Posted: Fri Sep 16, 2005 11:42 pm
I FOUND THAT THE BEST THING TO USE WAS ALUMINIUM PAINT, IT PICKS UP THE LIGHT BRILLIANTLY AND REALLY SHINES AND YOU CAN GET IN TO ALL THE TIGHT SPOTS THAT A WIRE BRUSH CANT, YOU CAN MAKE ALL THE METAL ENGINE COMPONENTS MATCH, IT IS UNAFFECTED BY HEAT AND STOPS TE ALUMINIUM FROM OXIDISING OVER TIME. A QUICK AND EASY IDEA THAT ONLY COSTS A FEW QUID BUT LOOKS GREAT!
Posted: Fri Sep 16, 2005 11:48 pm
You seem to have CAPS LOCK on mate. Is your keyboard broken?
Posted: Sat Sep 17, 2005 10:41 am
I reckon if you try some wire wool with Autosol metal polish it will be way on course for a proper shiny bling finish. Then just finish with a cloth with Autosol