Page 1 of 1

slave cylinder

Posted: Tue Nov 10, 2009 7:53 pm
by fiky
hi guys can you tell me how much roughly will it be to replace the slave and master cylinder for the clutch on a e30 320i

Re: slave cylinder

Posted: Tue Nov 10, 2009 8:14 pm
by BadDave
Aftermarket parts would be about £50-£60 for both the master and the slave,then labour on top of that unless your doing it yourself

slave cylinder

Posted: Tue Nov 10, 2009 8:40 pm
by fiky
how much with the labour roughly cost to change the master and slave cylinder winkeye winkeye winkeye

Re: slave cylinder

Posted: Tue Nov 10, 2009 8:50 pm
by BadDave
fiky wrote:how much with the labour roughly cost to change the master and slave cylinder winkeye winkeye winkeye
Would depend entirely upon the garage/mechanics retes,how long he took to do the job and how much he charges for the new brake fluid.

Re: slave cylinder

Posted: Tue Nov 10, 2009 11:42 pm
by Chris
Not a paticularly difficult job to do yourself, just a bit fiddly.

I guess you've heard about replacing them both together?

Chris

Re: slave cylinder

Posted: Wed Nov 11, 2009 1:54 am
by daimlerman
I would reckon on at least an hour's labour,so a typical garage charge would be around £100.