temp guage problem

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
User avatar
Felix79
All loved up !
Posts: 5134
Joined: Sat May 24, 2008 11:00 pm
Location: Hereford

Sun Mar 01, 2009 2:50 pm

My temp guage is no longer reading, it will move when I turn the ignition on to just under the White line under cold. I have pulled the display out and checked the nutt and cabels. What else could it be? Also the car is now very rough when cold.
Felix79 aka Dan
If you got haters, then your doing something right!
E85 Z4M Roadster
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49358
Joined: Mon Jan 10, 2005 11:00 pm

Sun Mar 01, 2009 6:43 pm

If this is a M20, check out the plug/socket (and under the rubber boots) under the inlet manifold, where the injector loom connects to the engine loom
millyboy
E30 Zone Newbie
E30 Zone Newbie
Posts: 10
Joined: Mon Feb 09, 2009 11:00 pm
Location: SYDNEY Australia

Thu Mar 05, 2009 5:59 pm

i had that problem and checked under the bonet and found that the dash board was fucked :) :mad:
milton ..E30 318i M10 power plants .... :)
Post Reply