Page 1 of 1
pulling out engine
Posted: Sat Feb 21, 2009 9:23 pm
by trex
hello just wondering roughly how long it will take
to take the engine out of my 325 with no ramp
what problems should i look out for thanks for
the help
al
Re: pulling out engine
Posted: Sat Feb 21, 2009 10:59 pm
by bumhole
Me and a mate just took an engine and box out of a 320 in about 3 hours today with lots of tea breaks. It's fairly straight forward. We had a jack under the gearbox as it was coming out and gradually lowered it the further the engine came out. We just hooked the crane to the front engine lift point with the car on axle stands at the front. I'm sure some people on here will tell you exactly the best way though. Don't forget the clutch or all the hoses. Have fun
Re: pulling out engine
Posted: Sat Feb 21, 2009 11:04 pm
by trex
ok thats cool thanks for the advice
Re: pulling out engine
Posted: Sat Feb 21, 2009 11:08 pm
by leeparkes
plan it out beforehand and you will get it done quicker
Make sure 'everything' is disconnected
some say to lift the back because of the angle the engine will come out at.
not necessary but a load leveler is a good idea.