E30 Zone

Hi Guys,

I have had a problem with only one of the washer jets working, so today after it stopped raining I decided to have a look.

What is the T piece in the line supposed to do. Yeah I know it splits the water to both washers, but I'm sure it does more than that. Mine squrts water out of 2 holes in the T piece rather the directly to the washer jets. I'm guessing this shouldn't happen and the T piece is F***ed!

Any thoughts?? Can it be repaired or do I need a new one??

Cheers
Jack

They are one way valves available from BMW. Mine died and did the same, can't remember how much they were.

sure i got mine from ecp less than £10 i think.

Thanx fellas!!

Anyone got one knocking around for a couple of £££???

magpie wrote:sure i got mine from ecp less than £10 i think.

Or about half that from BMW, IIRC.
Check with the zone's genuine parts forum.

I've got the same prob, currently £3 at gsf.

Thanx!! I'll get onto Karl today.

Had this problem to, just drilled all 3 ends, and aroldited the 2 small holes. Good as gold.

Chris36 wrote:Had this problem to, just drilled all 3 ends, and aroldited the 2 small holes. Good as gold.

Words fail me!!

I had this problem, replaced the pressure regulator with another with failed even more disasterously then the last with 6 months! Bloody crap they are!!! My fingers were to big to close the grips for the washer hoses back inside the bonnetand I had to leave it hanging out

Ordered a new T piece from Karl at Cotswold for £4.15 delivered!

New here. I need a T piece also. Anyone provide details for Karl?

Karl, (amongst others) = zone' BMW genuine parts dept.'

Brianmoooore wrote:

Chris36 wrote:Had this problem to, just drilled all 3 ends, and aroldited the 2 small holes. Good as gold.

Words fail me!!

This was only a temporary fix by the way!!! Sorted now with a replacement!!

Brianmoooore wrote:

Chris36 wrote:Had this problem to, just drilled all 3 ends, and aroldited the 2 small holes. Good as gold.

Words fail me!!