what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 1:07 am
looking at getting one of my spare ecus chipped at some point in the future what choices can i get for it and who on here can supply them ?
E30 Zone
The Largest Online E30 Community
https://www.e30zone.net/forum/
what chips can i get for the tech1 ?
Page 1 of 1
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 1:25 am
speedtouch.
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 12:22 pm
mccain 
sorry ill get me coat
sorry ill get me coat
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 12:25 pm
Ant does (/did) them... Depending on the spec of the car it's going into, I've got a ready-chipped 073 ECU going spare, with a slightly different chip from his 'off the shelf' ones. 
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 7:41 pm
spoke to him a while ago he dosent do a chip for the tech1magpie wrote:speedtouch.
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 7:42 pm
pm sentZiggy wrote:Ant does (/did) them... Depending on the spec of the car it's going into, I've got a ready-chipped 073 ECU going spare, with a slightly different chip from his 'off the shelf' ones.
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 7:51 pm
Ant
Speedtouch
Evolve
Ebay= could be shit, dont get resistors
Speedtouch
Evolve
Ebay= could be shit, dont get resistors
Re: what chips can i get for the tech1 ?
Posted: Wed Jan 07, 2009 8:35 pm
or an ISjbh wrote:spoke to him a while ago he dosent do a chip for the tech1magpie wrote:speedtouch.
got that from evolve 
Re: what chips can i get for the tech1 ?
Posted: Thu Jan 08, 2009 8:54 am
I do chips fr the following
M40B18 , 157 and 387 ECU's
M20B20 172/381/2 ECUs
M20 B25 073 ECU( chromies)
M20B25 173/380
M20B23 (motronic conversion required)
M20B27- all variations
M20B28- cammed or otherwise, 4 variations
M42B18 175 ECU Two software versions of the three
M30B35 179 ECU
All are in house units developed over the last 7 years or so.
Thats that clarified
M40B18 , 157 and 387 ECU's
M20B20 172/381/2 ECUs
M20 B25 073 ECU( chromies)
M20B25 173/380
M20B23 (motronic conversion required)
M20B27- all variations
M20B28- cammed or otherwise, 4 variations
M42B18 175 ECU Two software versions of the three
M30B35 179 ECU
All are in house units developed over the last 7 years or so.
Thats that clarified
Re: what chips can i get for the tech1 ?
Posted: Sun Jan 11, 2009 5:06 pm
Whats the price for the 073 ECU then Ant?
Re: what chips can i get for the tech1 ?
Posted: Mon Jan 12, 2009 9:47 am
all are £65 inc delivery, all deliver an increase over stock 073 setup and high CR motor really chips well ! max 6.5K limiter though due to the flywheel TDC pin not liking higher rpms
some 073s are 24 pin socket so need an extra 4 pins added, no drilling required though as the PCB has the required holes, happy to modifiy if and when required.
073 setup and high CR motor really chips well ! max 6.5K limiter though due to the flywheel TDC pin not liking higher rpms some 073s are 24 pin socket so need an extra 4 pins added, no drilling required though as the PCB has the required holes, happy to modifiy if and when required.
Re: what chips can i get for the tech1 ?
Posted: Fri Feb 06, 2009 1:48 am
Ant, what happened to your website?