Page 1 of 1
Socket size for m12 prop bolt?
Posted: Mon Sep 15, 2008 11:37 am
by Ziggy
Need to tighten the bolts on my prop coupling (again), so I want to get a nice new tight-fitting socket, and can't remember for certain what size I need to go out & buy! Are the nuts & bolts both 19mm? It's an E28 prop btw, so not necessarily the same as E30 stuff, but I figure an M12 bolt's got to be pretty standard?!
Ta
Re: Socket size for m12 prop bolt?
Posted: Mon Sep 15, 2008 11:40 am
by town325i
17mm is the one you need
Re: Socket size for m12 prop bolt?
Posted: Mon Sep 15, 2008 3:20 pm
by Ziggy
You're sure on that? Definitely for m12 bolts? I think E30 ones are M10...
Re: Socket size for m12 prop bolt?
Posted: Mon Sep 15, 2008 3:22 pm
by town325i
o s*it you have confussed me now its either 17mm or 19mm i cant remember
Re: Socket size for m12 prop bolt?
Posted: Mon Sep 15, 2008 3:39 pm
by HarvyS
http://www.namrick.co.uk/boltspec.asp
That says the m12 is a 19mm. dunno if that's the same as the prop bolt and nut. hope it helps.