Page 1 of 1

M20 Alternator voltage regulators

Posted: Tue Jul 08, 2008 4:34 pm
by sam325is
Are these prone to packing in? Im off to france soon so im replacing my brush pack as it is.

Has anyone had any bad experiences?

Re: M20 Alternator voltage regulators

Posted: Tue Jul 08, 2008 4:43 pm
by rj
No they are very reliable but of course like any seviceable part can fail. The brushes should be evenly worn and have a minimum length of 5mm.

What is the alternator output voltage across the battery terminals? Too low a reading can indicate a faulty regulator/alternator and too high a reading can be an indication that the regulator itself is defective.

Re: M20 Alternator voltage regulators

Posted: Tue Jul 08, 2008 4:46 pm
by sam325is
Dont know what the reading is as i cant find my multi meter :(

I havent been having any running issues...just good old preventitive maintenance.

Re: M20 Alternator voltage regulators

Posted: Tue Jul 08, 2008 8:06 pm
by Brianmoooore
Regulator/brush pack is normally ultra reliable, but it is a wearing part, and eventually wears out.