E30 Zone

Hi guys,

i've got myself some eyebrows from ECP. How do you put them on? do you have to place over the rubber lining thing?

also, is it worth getting it sprayed? or can you bung em straight on?

cheers fellas.

http://i141.photobucket.com/albums/r62/ ... C01324.jpg

i fitted mine last week, have to take the rubbers off or will sit to high and cant close bonnet, i used No Nails as i couldnt be arsed to do a proper job lol

1: Open bin
2: Insert eyebrows
3: Close bin

Job done!

Ziggy wrote:1: Open bin
2: Insert eyebrows
3: Close bin

Job done!

or.................


I found it easier to take the grilles off the car and fit them.Two screws each side of the car underneath the headlights then just three little clips on each side above the lights that simply pop off with the help of a screwdriver.

Remove the foamy stuf with a stanley knife then line the eyebrows up and hold in place with some masking tape.

I drilled two holes,one at each end of the brow then screwed them in place with some self tapping screws

If you are painting them its best to do that before you fit them!

shane320ii wrote:

Ziggy wrote:1: Open bin
2: Insert eyebrows
3: Close bin

Job done!

or.................


I found it easier to take the grilles off the car and fit them.Two screws each side of the car underneath the headlights then just three little clips on each side above the lights that simply pop off with the help of a screwdriver.

Remove the foamy stuf with a stanley knife then line the eyebrows up and hold in place with some masking tape.

I drilled two holes,one at each end of the brow then screwed them in place with some self tapping screws

If you are painting them its best to do that before you fit them!

Ditto