Any ideas much appreciated
central locking wont deadlock
Moderator: martauto
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Could just be a corroded pin in the door hinge post plug and socket, but this pin doesn't usually give trouble. Usual cause is slight wear in the operating arrangements for the microswitch worked by the lock barrel.
Cured by removing the lock barrel and the plate that the microswitch is mounted on, and putting a slight bend in the operating arm for the switch.
One of many little tweaks I do to all E30s that pass my way.
Cured by removing the lock barrel and the plate that the microswitch is mounted on, and putting a slight bend in the operating arm for the switch.
One of many little tweaks I do to all E30s that pass my way.


