Bmw e30 abs help
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Yes, but there's a lot of work. All four hubs need to be the type that have the holes for the sensors, and the ABS rings on the bearings/drive shafts. Brackets need to be welded on for the ABS pump.
After that, the wiring is relatively simple. It's all self contained looms, apart from the supply from pin 20 of the C101 engine loom plug.
After that, the wiring is relatively simple. It's all self contained looms, apart from the supply from pin 20 of the C101 engine loom plug.
Okay thanksBrianmoooore wrote:Yes, but there's a lot of work. All four hubs need to be the type that have the holes for the sensors, and the ABS rings on the bearings/drive shafts. Brackets need to be welded on for the ABS pump.
After that, the wiring is relatively simple. It's all self contained looms, apart from the supply from pin 20 of the C101 engine loom plug.