Best lowering springs for an e30?

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
Jamie8GTi
E30 Zone Regular
E30 Zone Regular
Posts: 330
Joined: Fri Mar 01, 2013 11:00 pm
Location: Suffolk

Sat Mar 08, 2014 10:15 pm

Been looking at eibach springs and bilstein b4 shocks.. They claim a 30mm drop all round but with my m50 I think it will be a little more upfront! Anyone run these and could recommend them or if not any other quality springs? Cheers
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49358
Joined: Mon Jan 10, 2005 11:00 pm

Sat Mar 08, 2014 10:25 pm

Stick with the Eibach and B4s. The M50's not that much heavier than a M20.
Thicker upper spring pads (9mm) are available if you're really fussy.
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield
Contact:

Sat Mar 08, 2014 10:30 pm

Brianmoooore wrote:Stick with the Eibach and B4s. The M50's not that much heavier than a M20.
Thicker upper spring pads (9mm) are available if you're really fussy.
Took the words right out my mouth lol
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
User avatar
Mechagran
E30 Zone Newbie
E30 Zone Newbie
Posts: 66
Joined: Wed Jan 29, 2014 11:00 pm
Location: Devonshire

Sat Mar 08, 2014 11:00 pm

So far my experience with my h&r springs is very pleasant & generally have a good reputation. Took about 11 days to arrive and do a 40mm drop all round
Jamie8GTi
E30 Zone Regular
E30 Zone Regular
Posts: 330
Joined: Fri Mar 01, 2013 11:00 pm
Location: Suffolk

Sun Mar 09, 2014 12:49 am

I'd prefer it if the fronts a little lower! will help with the look I'm going for! I was just worried 30mm wouldn't be enough... I think I'll order them and if worse comes to worse I'm sure I can sort something out!
jas025
E30 Zone Regular
E30 Zone Regular
Posts: 395
Joined: Wed Aug 05, 2009 11:00 pm
Location: Back in Essex

Sun Mar 09, 2014 1:35 am

I went with MTEC and I'm more than happy with that choice but it depends on what you're looking for. I'm prioritising ride comfort and practicality.

A number of people said MTEC and Boge Turbos.
j2b
E30 Zone Regular
E30 Zone Regular
Posts: 884
Joined: Fri May 21, 2010 11:00 pm
Location: Kent

Sun Mar 09, 2014 4:06 pm

If i remember correctly by fitting E90/92 top hats that gives you another 10mm drop on the front.

part number here 31336764093
89 more door 6 pot
Post Reply