Wiring............

Sat Sep 17, 2005 12:11 am

have a look behind the wing mirrors take the plastic cover off there should already be 2 speeker wires

Sat Sep 17, 2005 12:27 am

thread them though the cable snake with all the others..

in the white pin connector there is a hole.. about the diam. of a pencil

put the door builds on to the card.. have a gooood lenght of wire trailing..

take off the footwell speaker covers.. find a thin stiff wire ( to use as a threading needle) and try and locate th hole from inside the footwell to door pillar.

when u get the threader to poke through, twist on your cable wire, and pull back through

i wired mine to my old footwell cabling.. but there may well be connectors up by the mirror covers already.. there were in mine also

Sat Sep 17, 2005 12:29 am

hi ya johnono

Sat Sep 17, 2005 12:30 am

easy

Sat Sep 17, 2005 12:35 am

sorry mate the wires will be there but you will have to conect them up as they will be dead wires , you can do this by takeing the foot well covers off and find the plug that johnono was saying there should be 2 there that are not in use, there the ones for the wires behind the mirrors

Sat Sep 17, 2005 12:56 am

i had wires there ready but i wired in some new wires as i didn`t want any joins in the speaker wires