hi i want to buy these old bmw bbs off of a 633 e24. i know they are 5 stud but what is the pcd??? also can you get adapters from 5x??? to 4x100
thanks luke
4 stud to 5 stud ????????
Moderator: martauto
4x100 => 5x120 adapters can't be made (bolts are partly over each other).
You can make E30 5x120, but it requires M3 parts or E36 front struts with E36 M3 stuff + Z3 / E36 compact rear trailing arms with all parts.
So it's not easy nor cheap, easier to find correct rims..
You can make E30 5x120, but it requires M3 parts or E36 front struts with E36 M3 stuff + Z3 / E36 compact rear trailing arms with all parts.
So it's not easy nor cheap, easier to find correct rims..
E30 Cabrio M-Tech, powered by V8
E34 M5 3.8 x 2
Alpina D10 Touring #33/93
E46 318i Touring
Toyota Hiace 4wd
E34 M5 3.8 x 2
Alpina D10 Touring #33/93
E46 318i Touring
Toyota Hiace 4wd
-
smithy318i
- Engaged to the E30 Zone
- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
+1.Jonsku wrote:4x100 => 5x120 adapters can't be made (bolts are partly over each other).
You can make E30 5x120, but it requires M3 parts or E36 front struts with E36 M3 stuff + Z3 / E36 compact rear trailing arms with all parts.
So it's not easy nor cheap, easier to find correct rims..
Just buy wheels with the correct offset and PCD.
Hell of a lot cheaper.
Adapters can be made. but alter the offset by 20cm.
