E30 Zone

can someone tell me what wheels these are please

RS copys? Look on eBay.

thats what i thought maxfield only they are a 2 piece rim the one on ebay are just one piece arent they?

are you sure they are 2-piece? I've seen such rims on ebay and they do look like 2/3 piece but actually are only 2-piece. They come in a 4x100/108 PCD and are 7.5x16 which seems to be the size on that car above.

Cheers
Wolf

yes they are 2 piece i bought them off a fellow close to me for £100 so cant be bad at that was going to sell them again as im lookin a set of borbets but if there only copies of bbs i might as well keep them as spares

if they are real BBS you'd see it under the centre cap. Can you remove it via unscrewing the central hex nut?

i will check that tomorrow thanks mate

They look good to me

feel free to contact me via PN or email any time if you need support in regards to BBS. I'm quite familiar with their products.

Cheers
Wolf

this is the rim I saw on ebay and it's 7.5x16 and one piece despite the looks

me to mate i quite like them but im after the deep dish look now

thats the ones i seen to although mine have 20 spokes and the copies have 17 thats where i get mixed up although very familier!

they look nice!! would you sell?

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

wokke wrote:

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

josh-hocking wrote:they look nice!! would you sell?

yes i will be selling just not at the moment mate

wokke wrote:

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

yes mate they would do fine wanna swap for my wheels plus a set of 7.5x17 rh toplines

if I do someone in Canada might get really upset

wokke wrote:if I do someone in Canada might get really upset

Nice to see you here Wolf

Lovely set of rims buddy! That ^ 6 series in your sig pic looks beautiful by the way, is it yours?

Sorry for going off topic

wokke wrote:feel free to contact me via PN or email any time if you need support in regards to BBS.

Cheers
Wolf

Hi Wolf,
And what about eproms? Are you the same Wokke which is seling the eproms on eBay?
Jan

Those wheels are 16 inch split rims. I think they are 2 piece, they were an option on the 320is.

wokke wrote:

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

these wheels are

wokke wrote:

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

Oh

My

God

Awesome.

old_skool_2002 wrote:

wokke wrote:if I do someone in Canada might get really upset

Nice to see you here Wolf

Lovely set of rims buddy! That ^ 6 series in your sig pic looks beautiful by the way, is it yours?

Sorry for going off topic

Thanks Dameon.
Yes, this E24 is one of three. It's an M635CSi which I restored three years ago. If you want to see some horror pictures check out this.
But I think the restoration has been wort it.

My other two E24 are a dolphin grey 635CSiA (auto tranny) and a diamond black shadow line 635 CSi (5-speed).

I'll try to set up an introduction of myself today in the trader's section giving some more info about me and my passion.

Cheers
Wolf

Yaninnya wrote:

wokke wrote:feel free to contact me via PN or email any time if you need support in regards to BBS.

Cheers
Wolf

Hi Wolf,
And what about eproms? Are you the same Wokke which is seling the eproms on eBay?
Jan

Hi Jan,

yes, that's me. My ebay name is wokke_2000

Cheers
Wolf

wokke wrote:Hi Jan,
yes, that's me. My ebay name is wokke_2000
Cheers
Wolf

Wolf,
I don't want to hijack the topic so I just send you a PM. Nice to se you here.
Jan

awsome rims, id like to get that finish for my rims, can i get mine polished to have a similar look ????

Getting back on topic and out of the hawking of one's wares, the wheels in the original post are OZ 2 piece splits and as Jon says were an option on the 320is.

ye im sure there oz splits aswell. habeeb, try www.pureklas.co.uk, give them an email and they will give you a quote for polishing your borbets. i think theres a pic of polished borbet a's in their pic gallery aswell

wokke wrote:

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

I think theyre the nicest wheels Ive seen in my life.

thanks. I have to admit that I hate to see them go to Canada but they won't fit any of my cars.

deepak wrote:ye im sure there oz splits aswell. habeeb, try www.pureklas.co.uk, give them an email and they will give you a quote for polishing your borbets. i think theres a pic of polished borbet a's in their pic gallery aswell

rebelcruiser wrote:

wokke wrote:

staffy wrote:me to mate i quite like them but im after the deep dish look now

like these? I just finished this set today for a Canadian customer.

these wheels are

Did someone say Bling?

Just got my quote back....£240 to do my Borbet T's like the one's above, and same for the Borbet A's...or all 8 for £450

Tempting.