E30 Zone

I have an MTEC 2 Front spoiler.

Anyone know if I fit this straight to my touring, or do I need any other MTEC bits ?

Thanks guys

Derek

easy fit just get all the clips from bmw will cost under a tenner for all of them ...but you will need to drill a few holes

You'll need the mounting clips, it will fit under the original front bumper.

You have to drill approx 7 or 9 holes in the valence to fit it, plus you'll need longer brake 'ducts' to fit alongside the foglights.

http://www.e30zone.net/modules.php?name ... chmtec.htm

yep you need clips and drill holes but its easy enough to fit follow the guide

Thanks alot, what a great club this is !!!

Yip, it'll fit. I'd love a touring with full Tech 2 kit.

the only annoying thing abbout fitting a tech 2 with the standard bumper is that the spoiler will stick out half inch on either side just below the bumper..... that would really annoy me!!! but put it on and look for a tech 2 bumper in the right colour and its an easy fix (writing the guide on how to fit it was harder!!)

mrlee

Thanks,

I will see how it looks and then look out for one maybe

Best

Derek

Nice shot Mark. Maybe put one of yours up too, so he can see the difference... not so obvious to those who don't know.

there you go.... actually they do not stick out on marks as much as one i have seen here....perhaps passable

That's not actually Mark's, that's Paul's. His is a genuine Sport, but has had a bump on the front at some time in its past before Paul got it. Doesn't look too bad with the colour-coded rubber strip in the bumper.

This one's Mark's... I so want that numberplate...