Page 1 of 1
M3 throttle bodys.
Posted: Sun Sep 16, 2007 2:08 pm
by Hath
How much exactly are they worth..?
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 8:37 pm
by Hath
?? E30 m3 tb's
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 8:52 pm
by alex-e30
wud an m3 throttle body fit straight on my 318i s?
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 9:22 pm
by Demlotcrew
It depends on what type they are as there are Three types.
Andrew
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 9:27 pm
by maxfield
3 types?
46mm...
48mm...
And...
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 9:55 pm
by playo
maxfield wrote:3 types?
46mm...
48mm...
And...
....John's (s14power) 49mm??
Price wise, well some idiot tried it on, on ebay and was asking somewhere in the region of £1200 for a 48mm.
Then put it back up for £850. Doubt it sold mind?
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 9:56 pm
by maxfield
Yes, but I'm thinking Andrew is talking about ones from factory.
There is also 50mm and slide throttle bodies.
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 9:59 pm
by playo
maxfield wrote:Yes, but I'm thinking Andrew is talking about ones from factory.
There is also 50mm and slide throttle bodies.
True,
Fook know's then mate??
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 11:07 pm
by jpboost
evo2 had 46mm throttle bodies, but the casings were different IIRC. Think they are widened out on the head side.
I've also heard of 46mm 'rally' TB's, but these may eb the same as the Evo2 ones.
Re: M3 throttle bodys.
Posted: Mon Sep 24, 2007 11:24 pm
by Demlotcrew
yup there are
Early 46mm
Evo II 46mm flaps but larger throat and 48mm casting
Late/SE 48mm with the larger casting and rubber gaskets to match.
Re: M3 throttle bodys.
Posted: Tue Sep 25, 2007 9:18 pm
by Hath
i have no idea wat they came off of.. all i knwo is it was an E30 m3, this is because my boss made a custom inlet for a supercharger conversion for one a while ago now.. ive "Aquired them".. so jsut cruous as to a prick really and will be modifying to fitmy is engine
Re: M3 throttle bodys.
Posted: Wed Sep 26, 2007 4:44 pm
by CraigG
id think they are a little on the large side for a 1.8, they would shunt power band through the roof. 38-40mm bodies are ample for a 1.8 16v imo
Re: M3 throttle bodys.
Posted: Wed Sep 26, 2007 4:47 pm
by Dan318-is
alex-e30 wrote:wud an m3 throttle body fit straight on my 318i s?
No
Re: M3 throttle bodys.
Posted: Thu Oct 18, 2007 9:38 pm
by Hath
so a rounabout price please
Re: M3 throttle bodys.
Posted: Fri Oct 19, 2007 8:43 am
by Demlotcrew
£200