Page 1 of 1

Going rate for my parts?

Posted: Sun Mar 19, 2017 9:56 pm
by akx_bmz
Hi guys ive been out of the e30 game for many years now and its still not looking like i will be getting back in one soon.
Looking to see if its worth selling the bit i have been hoarding. I maybe tempted to sell if it will be enough to fund other things / interests ect.

I need a rough guide price on the following please :-

1. Front and rear lowering springs (used but still bright red) with uprated shocks (yellow). About 30mm lower.

2. Front and rear Sparco strut braces.

3. Mtec 2 steering wheel (ok condition).

4. LSD diff unsure of ratio, removed from a 1987 325is.

5. Mtec 1 genuine rear bumper.

6. Mtec 1 pair of side skirts.

7. Possibly an Mtec 1 steering wheel (i will have to double check i still have it).

I was hoping to buy a regular e30 and fit these part to it, in my opinion it would have made it perfect.

Any help would be greatly appreciated.

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 10:11 pm
by magpie
what's your location ?

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 10:23 pm
by Cypriotgeeza
akx_bmz wrote:
6. Mtec 1 pair of side skirts.
Are these for a saloon or convertible?

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 10:36 pm
by akx_bmz
magpie wrote:what's your location ?
Manchester

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 10:37 pm
by akx_bmz
Cypriotgeeza wrote:
akx_bmz wrote:
6. Mtec 1 pair of side skirts.
Are these for a saloon or convertible?
Saloon

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 10:44 pm
by Cypriotgeeza
akx_bmz wrote:
Cypriotgeeza wrote:
akx_bmz wrote:
6. Mtec 1 pair of side skirts.
Are these for a saloon or convertible?
Saloon
cheers for the reply :thumb:

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 10:52 pm
by jimbom30cab
LSD could be 3.64 ratio if original to the car.

Re: Going rate for my parts?

Posted: Sun Mar 19, 2017 11:03 pm
by akx_bmz
jimbom30cab wrote:LSD could be 3.64 ratio if original to the car.
Thanks

Re: Going rate for my parts?

Posted: Tue Mar 21, 2017 10:14 pm
by Mongrel
First dibs on the LSD please

Re: Going rate for my parts?

Posted: Tue Mar 21, 2017 11:53 pm
by Motorhole
Is the Sparco front brace of the twin tube variety? If you're just in Manchester, I may be happy to do a deal on front & rear braces subject to pics etc :)

Re: Going rate for my parts?

Posted: Wed Mar 22, 2017 11:48 am
by satan16v
I'd be interested in the side skirts a‘a

Re: Going rate for my parts?

Posted: Wed Mar 22, 2017 8:16 pm
by M3KUK
What size are the steering wheels? What condition are they in?
Hard to value otherwise.