Page 1 of 1
Colour coding hard tops!
Posted: Sun Jan 24, 2016 11:38 am
by Staty
Hope everyone in e30 land is well! I've been wanting to colour code my standard hardtop for some time but I can't for the life of me find someone that will do it for me. I've heard its a bit of a pig of a job however I'm sure someone here can do them or know someone that can do this for me and do a cracking job. I'm based in Portsmouth, Hampshire so nice and local would be ideal! Any help would be great, thanks.
Re: Colour coding hard tops!
Posted: Wed Jan 27, 2016 3:41 pm
by povertyspec
just getting mine done in Sheffield for 150 quid. a weissmann one. just remember never rub it down past the gel coat and make sure you use a good sealant and the appropriate primer and top coat. theres plenty of choices for fibre glass. dont see it as a pig of a job with a good sprayer. rubbed mine doen myself with a rotary sander to remover the majority of the original finish, used earth wire under the window seal so it didint get damaged as i sanded up to the edge, i didnt want to remove the window glass but also didint want to catch the nice shiney seal.
Re: Colour coding hard tops!
Posted: Thu Feb 18, 2016 7:28 pm
by pimpmobil
I had mine painted by E R B Motors ltd Claybank rd portsmouth.
Hope that helps
Re: Colour coding hard tops!
Posted: Thu Feb 18, 2016 7:35 pm
by HartgeH27
pimpmobil wrote:I had mine painted by E R B Motors ltd Claybank rd portsmouth.
Hope that helps
That certainly does !