E30 Zone

Some of you may know that USA cars have small tags with the VIN/Chassis number on various parts of the car.

When the cars get painted they come off and they age with time.

We've been asked to make some (obviously there's the requirement to see some sort of proof of ownership before i do this this)

Very fiddly to do as there is not a specific font for them !

Here's a set that we've just sent out to the USA

Great stuff!

new work, Z1 Tyre pressure label

a pair of John Clark Aberdeen number plates. Note the Alpina roundel in place of the BMW one.



The owner of the car has also ordered a tax disc shield for the front and dealer window sticker for the back

the OEM ones are on the right but as its going onto John Clark supplied Alpina he's asked for a John Clark version incorporation the Sytners Alpina versions as well

Pukar_Designs wrote:a pair of John Clark Aberdeen number plates. Note the Alpina roundel in place of the BMW one.



The owner of the car has also ordered a tax disc shield for the front and dealer window sticker for the back

the OEM ones are on the right but as its going onto John Clark supplied Alpina he's asked for a John Clark version incorporation the Sytners Alpina versions as well

Note to purchaser of John Clark stickerz, get them Waxoiled PRONTO !

we prefer Bilt Hamber Dynax

Proper work, im so glad pukar designs has carried on ive got an order planned for when my car gets painted this year.

In regards to the U.S vin stickers my brother has a U.S cab here in the uk and these vin stickers are literally on every panel and the ones you have produced look exact, is the site up and running? i'll forward a link to him im sure he will be interested.

pacerpete wrote:

Pukar_Designs wrote:a pair of John Clark Aberdeen number plates. Note the Alpina roundel in place of the BMW one.



The owner of the car has also ordered a tax disc shield for the front and dealer window sticker for the back

the OEM ones are on the right but as its going onto John Clark supplied Alpina he's asked for a John Clark version incorporation the Sytners Alpina versions as well

Note to purchaser of John Clark stickerz, get them Waxoiled PRONTO !

Duly noted Pete.

NickE30singh wrote:

pacerpete wrote:

Pukar_Designs wrote:a pair of John Clark Aberdeen number plates. Note the Alpina roundel in place of the BMW one.



The owner of the car has also ordered a tax disc shield for the front and dealer window sticker for the back

the OEM ones are on the right but as its going onto John Clark supplied Alpina he's asked for a John Clark version incorporation the Sytners Alpina versions as well

Note to purchaser of John Clark stickerz, get them Waxoiled PRONTO !

Duly noted Pete.

You'll be alright Nick, P40 doesn't rust

did you manage to do mlg stuff mate need rear window sticker and dealer sticker for door shut and a set of plates

What would be a nice addition to the website , is a guide with pics and measurements maybe on placement of the stickers

They are a great finishing touch to a car

Anyone got pics of exact where the service stickers go ? Door shut and the boot one ?

Pukar_Designs wrote:Some of you may know that USA cars have small tags with the VIN/Chassis number on various parts of the car.

When the cars get painted they come off and they age with time.

We've been asked to make some (obviously there's the requirement to see some sort of proof of ownership before i do this this)

Very fiddly to do as there is not a specific font for them !

Here's a set that we've just sent out to the USA

Are these the ones with the bar code that are normally behind the rear number plates on later stuff

polsta wrote:What would be a nice addition to the website , is a guide with pics and measurements maybe on placement of the stickers

They are a great finishing touch to a car

Anyone got pics of exact where the service stickers go ? Door shut and the boot one ?

We are working on that and it will be on the new web site with an updated cart.

The problem is that there is not set location for the decals, they vary from year to year as they were all placed by hand on the production line

For example the high voltage warning can be on the turret or further down on the wheel arch

We do have lots of library photos to use as reference points. If someone wants to forward us photos that they own and giving us permission to use them on the web site then that would be great.

B7 wrote:

Pukar_Designs wrote:Some of you may know that USA cars have small tags with the VIN/Chassis number on various parts of the car.

When the cars get painted they come off and they age with time.

We've been asked to make some (obviously there's the requirement to see some sort of proof of ownership before i do this this)

Very fiddly to do as there is not a specific font for them !

Here's a set that we've just sent out to the USA

Are these the ones with the bar code that are normally behind the rear number plates on later stuff

Similar

Some of the USA Spec cars had larger ones in the engine bay with bar codes as well

I'll post up an example later that we have just completed

Pukar_Designs wrote:

polsta wrote:What would be a nice addition to the website , is a guide with pics and measurements maybe on placement of the stickers

They are a great finishing touch to a car

Anyone got pics of exact where the service stickers go ? Door shut and the boot one ?

We are working on that and it will be on the new web site with an updated cart.

The problem is that there is no set location for the decals, they vary from year to year as they were all placed by hand on the production line

For example the high voltage warning can be on the turret on further down on the wheel arch

We do have lots of library photos to use as reference points. If someone wants to forward us photos that they own and giving us permission to use them on the web site then that would be great.

I see , ive got the full set I think everything as when new, just doing some finishing to the bay over the next 10 days and then il put the last of the bsy stickers in and il take pics of the lot and send them to you and if you want you can use them to show how a whole set of your stickers, plates, screen stickers, ax holder etc all look on a restored car , they do look great and always attract comments when people look at the car

keep up the good work Atul , thanks for the engine bay stickers

right, has a a request for a Z1 tyre pressure label.

No photo of an original was submitted so i had to ask a contact for one. even he struggled an he owns a Z1, reason b ing the Z1's tyre pressure label in on the petrol flap, the hinge always breaks and they never replaced the label !

but i got one in the end

here's what i had to work with



used is as template



we had to draw the Z1 from scratch

and the finished article



result, one very happy customer in Canada

polsta wrote:What would be a nice addition to the website , is a guide with pics and measurements maybe on placement of the stickers

No, because you would just ignore it, start a 6 page thread on it and stick it in the wrong place anyway

can you do me a full engine bay set/tyre pressure/etc for an E28 M5 ? cheers

Victimz !

some number plates we have done over the last few weeks

Pukar_Designs wrote:right, has a a request for a Z1 tyre pressure label.

No photo of an original was submitted so i had to ask a contact for one. even he struggled an he owns a Z1, reason b ing the Z1's tyre pressure label in on the petrol flap, the hinge always breaks and they never replaced the label !

but i got one in the end

here's what i had to work with



used is as template



we had to draw the Z1 from scratch

and the finished article



result, one very happy customer in Canada

here's the finished item

Received a running-in sticker and a set of plates from Jan today - really chuffed! Big thumbs up..

got a full set of engine bay stickers top notch , just need the mlg stuff mate any joy.

gaszman wrote:got a full set of engine bay stickers top notch , just need the mlg stuff mate any joy.

yep we do.

Strugs wrote:Received a running-in sticker and a set of plates from Jan today - really chuffed! Big thumbs up..

Thank you:)

a few of these were made for a place in the USA who do a lot of high end restorations. Its for the AC compressor and bear in mind it does not get seen !

the image we were sent and the end product





some tyre pressure labels and emissions/catalyst decals

lots of our work is being uploaded to FB, there are several galleries on there

be here's some other recent things that we have done








the int on this one wasn't quite the standard font, we played around with it a touch to get it tight.




period correct BSAU markings





mid to late 90's Park Lane for an e36 M3







and some other items

Porsche, there were hard work. Had very little to go on but we got there in the end





Lotus Sunbeam

The original one below and ours is on top

our FB page

https://www.facebook.com/pukar.designs

we are also in Instagram as @pukar.designs

Hi Pukar_Designs

Recon you could make one of these?

Might need a slightly different date

Cheers

JIm

The actual export disc can be done but its a question of how accurate and detailed you want it. it would be priced as an hourly job and dare i say it thats got a fair few hours in it

is that the only photo you have ?

Yes it's the only photo I have.

Thanks

Re: L598HMO ... I thought I had the only E30 out there supplied by Prophets of Gerrards Cross! Mine is on its original plates, details on the database.