Page 1 of 2
wow.....
Posted: Mon Dec 30, 2013 3:13 pm
by 1001000010
http://www.ebay.co.uk/itm/Hartge-17-all ... 3a895ca65e
Glad i got mine for a third of that price. And thats the starting bid.
Cheers
Kaz
Re: wow.....
Posted: Mon Dec 30, 2013 3:26 pm
by Topblag
Re: wow.....
Posted: Mon Dec 30, 2013 3:30 pm
by 1001000010
I dont really give a shit mate!
Re: wow.....
Posted: Mon Dec 30, 2013 3:32 pm
by Fastroad
Would be nice to see pictures a˜Š
Re: wow.....
Posted: Mon Dec 30, 2013 3:32 pm
by Topblag
1001000010 wrote:I dont really give a shit mate!
I'll be keeping a close eye out for them.
Re: wow.....
Posted: Mon Dec 30, 2013 3:38 pm
by Fastroad
Re: wow.....
Posted: Mon Dec 30, 2013 3:48 pm
by suchy
I thought you purchased a set of 5 stud and were looking to get them plugged/redrilled for 4 stud?
Re: wow.....
Posted: Mon Dec 30, 2013 3:51 pm
by pacerpete
All rather pointless. Have you seen what they are going to be nailed onto !

Re: wow.....
Posted: Mon Dec 30, 2013 4:00 pm
by Topblag
pacerpete wrote:All rather pointless. Have you seen what they are going to be nailed onto !

It's all about the rimmzzzz bruvs.
Re: wow.....
Posted: Mon Dec 30, 2013 4:00 pm
by Topblag
custard test required.
Re: wow.....
Posted: Mon Dec 30, 2013 4:04 pm
by pacerpete
Topblag wrote:custard test required.
Plenty of custard cans but they are all structural , or will be when the (FOUR DOOR) scrapper has been lobbed up

Re: wow.....
Posted: Mon Dec 30, 2013 4:06 pm
by 1001000010
suchy wrote:
I thought you purchased a set of 5 stud and were looking to get them plugged/redrilled for 4 stud?
Decided against that idea and am going with PCD adapters.
4 or 5 stud pattern they are ridiculously overpriced was the point i was trying to make.
Cheers
Kaz
Re: wow.....
Posted: Mon Dec 30, 2013 4:52 pm
by suedenim
Sounds like you have 5 stud, hence topblag's disbelief that you scored a set of 4 x 100 for £900.
A 5 stud conversion has got to be preferable over messing with some shonky adaptors.
Re: wow.....
Posted: Mon Dec 30, 2013 5:02 pm
by Blitz
Having wheels that fit is preferable to everything else.
Re: wow.....
Posted: Mon Dec 30, 2013 5:05 pm
by Topblag
1001000010 wrote:suchy wrote:
I thought you purchased a set of 5 stud and were looking to get them plugged/redrilled for 4 stud?
Decided against that idea and am going with PCD adapters.
4 or 5 stud pattern they are ridiculously overpriced was the point i was trying to make.
Cheers
Kaz
You're full of it. The point you were trying to make was that you had 4 stud hartge splits, which you don't.
Re: wow.....
Posted: Mon Dec 30, 2013 5:08 pm
by pacerpete
Come on Colin, the world needs more people who waste money on quattroportes

Re: wow.....
Posted: Mon Dec 30, 2013 5:19 pm
by Topblag
pacerpete wrote:Come on Colin, the world needs more people who waste money on quattroportes


Re: wow.....
Posted: Tue Dec 31, 2013 1:13 pm
by domkolo
"I don't really give a shit mate" - hahahahahahaha, awesome.
Re: wow.....
Posted: Tue Dec 31, 2013 1:15 pm
by Fastroad
domkolo wrote:"I don't really give a shit mate" - hahahahahahaha, awesome.
Only the best for the Zone a˜a
Re: wow.....
Posted: Tue Dec 31, 2013 1:29 pm
by Jamie8GTi
bloody hell that is a lot! you'd think a listing like that would have a bit more info.. haha nice looking wheels though!
Re: wow.....
Posted: Tue Dec 31, 2013 1:51 pm
by Fastroad
Jamie8GTi wrote:bloody hell that is a lot! you'd think a listing like that would have a bit more info.. haha nice looking wheels though!
In this case less said cost more
Re: wow.....
Posted: Tue Dec 31, 2013 5:12 pm
by harry_p
They've been for sale for ages.
Are they worth it? Probably, but they may take a long while to find their buyer.
They're certainly very rare though, I've only ever seen two sets. The 5 stud versions are far more common and as such only worth a fraction of a perfect set of four stud wheels.
Re: wow.....
Posted: Tue Dec 31, 2013 6:41 pm
by si911t
1001000010 wrote:I dont really give a shit mate!
brilliant
Re: wow.....
Posted: Wed Jan 01, 2014 3:01 pm
by Jozi
16's are even rarer in 4stud.
As Harry says, these have been up for a long time and I think at different prices also, think he might be a zoner to.
Re: wow.....
Posted: Wed Jan 01, 2014 3:48 pm
by leeparkes
domkolo wrote:"I don't really give a shit mate" - hahahahahahaha, awesome.

Re: wow.....
Posted: Wed Jan 01, 2014 6:14 pm
by Warrior
Re: wow.....
Posted: Wed Jan 01, 2014 6:45 pm
by e30topless
your rimmz are worthless E36 wheels, if you paid one 3rd of that asking price then you were robbed! they are the ugliest foooking wheel Hartge ever made !!
they will not fit your car without rubbing issues, 5-4 stud dramas/spacers and all kinds of other bollox,
you may not give a shit now, but I believe you will after the fuckfest you are about to have just getting your turd rolling..

Re: wow.....
Posted: Wed Jan 01, 2014 6:49 pm
by Warrior
they will not fit your car without rubbing issues, 5-4 stud dramas/spacers and all kinds of other bollox,
you may not give a shit now, but I believe you will after the fuckfest you are about to have just getting your turd rolling..

[/quote]
He has 2 options... E36 hubs or sell them?
Re: wow.....
Posted: Wed Jan 01, 2014 6:49 pm
by Warrior
they will not fit your car without rubbing issues, 5-4 stud dramas/spacers and all kinds of other bollox,
you may not give a shit now, but I believe you will after the fuckfest you are about to have just getting your turd rolling..

[/quote]
He has 2 options... E36 hubs or sell them?
Re: wow.....
Posted: Wed Jan 01, 2014 6:59 pm
by Fastroad
The proper E30 M3 fitment ones are not too bad looking.
Not sure about all the redrilling and offset stuff probably all just a waste of time
Re: wow.....
Posted: Wed Jan 01, 2014 7:10 pm
by Topblag
e30topless wrote:
your rimmz are worthless E36 wheels, if you paid one 3rd of that asking price then you were robbed! they are the ugliest foooking wheel Hartge ever made !!
they will not fit your car without rubbing issues, 5-4 stud dramas/spacers and all kinds of other bollox,
you may not give a shit now, but I believe you will after the fuckfest you are about to have just getting your turd rolling..

What a tit.
Re: wow.....
Posted: Wed Jan 01, 2014 7:17 pm
by ross_jsy
Guys, can't you see he doesn't give a shit while being full of it?
Re: wow.....
Posted: Wed Jan 01, 2014 7:18 pm
by e30topless
Fastroad wrote:
The proper E30 M3 fitment ones are not too bad looking.
Not sure about all the redrilling and offset stuff probably all just a waste of time
Classic "C" design, I have lots of em
I only speak from experience, which usually means foook all but it's always worth buying wheels that fit, and not one's that have to be made to fit !

Re: wow.....
Posted: Wed Jan 01, 2014 8:31 pm
by Warrior
I say put the standard bbs back on and pornn them rims bruvaaaaa
Re: wow.....
Posted: Wed Jan 01, 2014 9:13 pm
by HartgeRaul
I know three sets of Hartge split 17x7.5 17x8.5 4x100. In 1996 I bought a brand new set from Hartge for $2,900 US. I found a other used set for $1,700. I gave my friend a chance to buy them. I regret it. My friend has two sets. One of them is my old set. I am in the proses of trading him for e30 m3 17x7.5 17x8.5 5x120.
Here is pic of the ones I bought from Hartge on my friend e30.
Here is the other set I found 2 years ago. My buddy bought. I really regret it.
