Page 1 of 1
bbs rims
Posted: Thu Jun 28, 2012 3:23 pm
by jim_utf
Hi Guys/girls......
Just found these on ebay are they worth the price???
http://www.ebay.co.uk/itm/4-x-Alloy-Whe ... 3377fde799
Re: bbs rims
Posted: Thu Jun 28, 2012 3:25 pm
by magpie
only 6.5 j and 15"
Re: bbs rims
Posted: Thu Jun 28, 2012 3:27 pm
by harry_p
it's a reasonable price, but theyre only rms, and they won't look any good on an e30 unless it's too low to drive.
unless you like the rollerskate look
Posted: Thu Jun 28, 2012 11:34 pm
by jim_utf
Yeah i spose but im after some m3 rz's but i cant afford the 5 stud conversion lol! Does anyone know if i can get 5 stud hubs to fit on sport legs?
Re:
Posted: Fri Jun 29, 2012 12:03 am
by Rav335uk
Those aren't too bad, they can turn out to look like this on the E30.
Re:
Posted: Fri Jun 29, 2012 10:42 am
by Miris325i
I would say don't buy them, as £650 is pretty high price for original 6.5' and they also look pretty small on e30 (specially with mtech2 bodykit)....talking from experience as i had set of these.
As Rav said if RM they must be with proper dishes...i saw staggered set 8/9 for £750 not that long ago
Re:
Posted: Fri Jun 29, 2012 11:02 am
by Rav335uk
Sorry, didn't look at the price, you shouldn't be paying more than £400 for a set of 6.5j's
Re:
Posted: Fri Jun 29, 2012 12:33 pm
by Miris325i
Rav335uk wrote:Sorry, didn't look at the price, you shouldn't be paying more than £400 for a set of 6.5j's
yep i sold mine for £450 with really nice yokohama on it
Posted: Tue Jul 03, 2012 12:42 am
by jim_utf
I just want a nice new set of rims as I don't really like alpina reps, plus wanna
keep the car as standard as poss!
Posted: Tue Jul 03, 2012 1:17 am
by Miris325i
jim_utf wrote:I just want a nice new set of rims as I don't really like alpina reps, plus wanna
keep the car as standard as poss!
If u wanna keep car standard then go for origo 15 (but with mtech2 u need proper lowering)....or try find Hartge or Schnitzer in 16inches
Re:
Posted: Tue Jul 03, 2012 4:44 pm
by Quaser
I have a set of 16" Ac Schnitzer alloys for sale if you are interested - need a refurb which i was about to get done - so could do a deal before and after refub if you want!
Kaz
Re:
Posted: Tue Jul 03, 2012 5:05 pm
by Rav335uk
I like these
Re:
Posted: Tue Jul 03, 2012 5:57 pm
by Miris325i
Rav335uk wrote:I like these
I like them too!!! Any info about sizes and prices?
Re:
Posted: Tue Jul 03, 2012 6:03 pm
by Rav335uk
16" x 8j in E30 ET's
Look for "Stance Wheels" and UK shops that sell them, AFAIK only one UK outlet at the mo.
Re:
Posted: Tue Jul 03, 2012 7:38 pm
by leeparkes
Cool wheels Rav.
Re:
Posted: Tue Jul 03, 2012 7:54 pm
by Rav335uk
I might sell a set of Hartges to buy a set of these.
I really like them, different.
Re:
Posted: Tue Jul 03, 2012 7:57 pm
by matt86
Rav335uk wrote:I might sell a set of Hartges to buy a set of these.
I really like them, different.
How much are these Rav? Any spacers spigot rings required? do they do them staggered?
Re:
Posted: Tue Jul 03, 2012 8:05 pm
by Rav335uk
Not sure Matt on price, if you look at the websites, it asks you to phone for a price, and staggered no, only 16" x 8j.
Re:
Posted: Tue Jul 03, 2012 10:09 pm
by E30123
Re:
Posted: Wed Jul 04, 2012 1:02 am
by Miris325i
£460 for new 16 alloys isn't bad price at all....temping
Re:
Posted: Wed Jul 04, 2012 9:57 am
by kangman
Miris325i wrote:£460 for new 16 alloys isn't bad price at all....temping
there 15s
Re:
Posted: Wed Jul 04, 2012 10:32 am
by Rav335uk
16's are available
Re:
Posted: Wed Jul 04, 2012 10:53 am
by Miris325i
oops
...but still better price then for used RM
Posted: Wed Jul 04, 2012 11:04 am
by matt86
How much are the 16's without tyres? Do they do them in 17'z?
Re:
Posted: Wed Jul 04, 2012 11:15 am
by Rav335uk
/NO 17's !!!!!
Look at the site, 15 and 16 only.
Re:
Posted: Wed Jul 04, 2012 12:50 pm
by matt86
The place I just rang "projex" said they are 850 for the 16's WITHOUT tyres! They are nice as rav said, but think what you could get with 850 quid.
Re:
Posted: Wed Jul 04, 2012 1:06 pm
by kangman
matt86 wrote:The place I just rang "projex" said they are 850 for the 16's WITHOUT tyres! They are nice as rav said, but think what you could get with 850 quid.
matt you ever thought about rotiform NUEs, i would defo look into them if i was rocking a mtech2. Havent seen any1 else do it
Re:
Posted: Wed Jul 04, 2012 5:28 pm
by E30123
Miris325i wrote:£460 for new 16 alloys isn't bad price at all....temping
Plus the £100 odd for posting....and then possibly customs fee
Re:
Posted: Wed Jul 04, 2012 7:05 pm
by leeparkes
matt86 wrote:The place I just rang "projex" said they are 850 for the 16's WITHOUT tyres!
Posted: Wed Jul 11, 2012 7:17 pm
by kangman
Re:
Posted: Wed Jul 11, 2012 7:22 pm
by Barx325i
Miris325i wrote:Rav335uk wrote:Sorry, didn't look at the price, you shouldn't be paying more than £400 for a set of 6.5j's
yep i sold mine for £450 with really nice yokohama on it
you most certainly did, how was the rest of your day?
as for RM's ideally you're after 001's, they're much much lighter than 002/012's, 7j std and a flat diamond cut face
