Page 1 of 1

Local breakers!323i,Air con etc

Posted: Tue Sep 20, 2005 10:01 pm
by eko
Went for a mooch round my local scrap yard today and came across a Breg 323i in light metallic Blue,2 door.
It has barely been touched and is full of top parts.
Air conditioning.
Very tidy Blue interior,rear headrests etc,wear on drivers seat.
Roof mount computer.
Electric roof.
Good bumpers,lights etc.

It is also fitted with a boot lid liner,the full plastic cover on the inside of the boot lid,the one with the bigger tool kit also pair of mint fog lights,but im having these items winkeye
Anyone need anything from it?Or i can check over any specific part for anyone who may be interested!

Posted: Tue Sep 20, 2005 10:34 pm
by kingbreezer
How easy/hard is it to retrofit the air con? I'd be interested if it's doable.
Also are the badges ok, as mine are rotten.
Thanks :)

Posted: Tue Sep 20, 2005 10:39 pm
by eko
kingbreezer Posted: Tue Sep 20, 2005 9:34 pm Post subject:

--------------------------------------------------------------------------------

How easy/hard is it to retrofit the air con? I'd be interested if it's doable.
Also are the badges ok, as mine are rotten.
Thanks
Try doing a search for fitting air con,should find something there!Can check the badges for you,which ones?bonnet/boot badges or 323i badge :)

Posted: Tue Sep 20, 2005 11:09 pm
by kingbreezer
eko wrote:
Try doing a search for fitting air con,should find something there!Can check the badges for you,which ones?bonnet/boot badges or 323i badge :)
Sorry, the bonnet/boot ones. I'll have a quick search on the aircon thing... Time is not my friend at the moment though, I shouldn't think I could fit it until christmas, when it is pointless! :roll: It would add value to my car though...

Posted: Tue Sep 20, 2005 11:11 pm
by eko
i will check them for you :)

Posted: Tue Sep 20, 2005 11:17 pm
by kingbreezer
eko wrote:i will check them for you :)
Thanks dude.
I can't find any threads on air con and have to be up early tomorrow. I'll resume the search then! Hehe.
If there is a Z3 in the scrappy, I also need a 1.9 or 2.8 gearstick for a conversion hehe.