Page 1 of 1
O RINGS
Posted: Mon Mar 15, 2010 9:58 pm
by barrymate
NEED NEW O RINGS FOR MY E30 AS THEY ARE PERISHED AND INLET MANIFOLD GASKET CAN I BUY A KIT FORM AND WHERE CAN I FIND THEM
CHEERS HARRY
Re: O RINGS
Posted: Mon Mar 15, 2010 10:04 pm
by B7
What o rings you need Harry?
Inlet manifold gaskets there are 4 singles and a double for the centre two ports.
Main dealer are cheap enough.
Part number for the gaskets are
4 x 11611726010
1 x 11611726012
Re: O RINGS
Posted: Mon Mar 15, 2010 10:08 pm
by barrymate
the ones on the injectors i think running really crap at the moment sounds if air leak that sound right ?
Re: O RINGS
Posted: Mon Mar 15, 2010 10:08 pm
by barrymate
also idling under 1000 rpms
Re: O RINGS
Posted: Mon Mar 15, 2010 10:10 pm
by fowler
sounds more like inlet to me barrymate as if the o rings on injectors had failed there would be petrol everywhere
Re: O RINGS
Posted: Mon Mar 15, 2010 10:13 pm
by barrymate
fowler wrote:sounds more like inlet to me barrymate as if the o rings on injectors had failed there would be petrol everywhere
the inlet gasket ? will change the o rings to just wondering if they done some kit form for all these cant seem to find the right ones
Re: O RINGS
Posted: Mon Mar 15, 2010 10:15 pm
by fowler
yes they do a kit not sure of the part number if you look on realoem.com and find the original BMw part number under fuel preperation subheading
Re: O RINGS
Posted: Mon Mar 15, 2010 10:16 pm
by fowler
sorry forgot say inlet gasket its a good place to start as you might find a defecive vacum pipe when stripping it all down
Re: O RINGS
Posted: Mon Mar 15, 2010 10:20 pm
by barrymate
fowler wrote:sorry forgot say inlet gasket its a good place to start as you might find a defecive vacum pipe when stripping it all down
are you a mechanic ? where are you based ?
Re: O RINGS
Posted: Tue Mar 16, 2010 5:05 pm
by Rich_W
I've just ordered 4 of these
£3 each from BMW.
I'd forgotton about M Tax too!