Alpina rep spigot rings
Posted: Thu Jul 30, 2009 8:47 pm
Finally got time to put my alpina reps on today, but found out I need a spigot ring, they were miles off sitting on the hub! Any ideas which ones i need?
Page 1 of 1
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 8:50 pm
the one that mates reps to e30 hubs.
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 8:51 pm
Which is....
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 9:12 pm
...the ones that you get from bk racing to go with the alloys in the fitment you require.
http://www.bkracing.co.uk/aspbite/categ ... ccessories
http://www.bkracing.co.uk/aspbite/categ ... ccessories
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 9:46 pm
I'm not 100% sure they are bk, can't find it on them. It says emc or something, and are 17x7.5 et20....
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 10:11 pm
measure what you have. mine are 56.5mm centre iirc for the e30 and the hole size on the rep is about 73mm.
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 10:31 pm
They are at work I'm not in till Tuesday and wanted to order for then 
Re: Alpina rep spigot rings
Posted: Thu Jul 30, 2009 11:44 pm
the ones he needs are 57.1/72.6 fuzzy. try Spigot Rings U.K. they cost approx £16 for a set iirc:
http://cgi.ebay.co.uk/SPIGOT-RINGS-FOR- ... 286.c0.m14
http://cgi.ebay.co.uk/SPIGOT-RINGS-FOR- ... 286.c0.m14
Re: Alpina rep spigot rings
Posted: Fri Jul 31, 2009 1:07 am
Are you 100% sure? If so i'll order in the morning?
Re: Alpina rep spigot rings
Posted: Fri Jul 31, 2009 11:24 am
why not take your wheels and car down to a wheel shop who supply these - thats what i did and they can fit them while you wait which saves getting your hands dirty - £20.
Re: Alpina rep spigot rings
Posted: Fri Jul 31, 2009 1:26 pm
Ordered some now, If wrong I'll try that instead