Page 1 of 1
What would you do? CAM SHAFT
Posted: Mon Jul 25, 2005 3:52 pm
by e30sal
Would you go the BMW for your CAM Shaft for Ԛ£250.00 or German Swedish at Ԛ£67.50?
Big difference?
Posted: Mon Jul 25, 2005 5:03 pm
by Karan
get the GSF one......
its made by 'febi bilstien' who make good stuff
Karan
Posted: Mon Jul 25, 2005 5:09 pm
by Simon13
"febi bilstein" make OE bmw parts for E30's. Front control arms and a few other bits are made by them too
Posted: Mon Jul 25, 2005 6:21 pm
by 320Touring
nice one lads;-) duly noted
Posted: Mon Jul 25, 2005 7:26 pm
by Gwynleym10
Is that really Ԛ£182.50 for a bmw stamp?
Re: What would you do? CAM SHAFT
Posted: Mon Jul 25, 2005 9:05 pm
by 325dude
e30sal wrote:Would you go the BMW for your CAM Shaft for Ԛ£250.00 or German Swedish at Ԛ£67.50?
Big difference?
or spend another Ԛ£150 and get a shrick uprated and get some more bhp out of your engine..................j
Posted: Tue Jul 26, 2005 12:41 pm
by tourer-dan
I replaced mine with a gsf cam an dit's bsolutely fine. The only thing that concerned me was that the oem.com quoted about 3 part numbers for BMW M20b25 cams and GSF only do one. Still ,as I say, mines fine (when the bast4rd car can stay reliable for long enough for me to actuallty drive it)
Re: What would you do? CAM SHAFT
Posted: Tue Jul 26, 2005 1:41 pm
by e30geezer
e30sal wrote:Would you go the BMW for your CAM Shaft for Ԛ£250.00 or German Swedish at Ԛ£67.50?
Big difference?
hi, i would have to agree with simon, & karan ,
Posted: Wed Jul 27, 2005 5:59 pm
by e30sal
Thanks guys but I've just been offered a better alternative and that's a 318 lump out of a touring, cheaper to swap them lol
Wish me luck!
Posted: Wed Jul 27, 2005 8:08 pm
by Dee
Lads what about a road/race cam, what do you all recommend as i want to get me head done soon and i want to improve it. Also what about larger Valves and how much should i get the head skimmed by as i will also be getting it gas flowed
Posted: Thu Jul 28, 2005 1:05 pm
by e30geezer
e30sal wrote:Thanks guys but I've just been offered a better alternative and that's a 318 lump out of a touring, cheaper to swap them lol
Wish me luck!
NICE ONE SAL, IM SURE IT WILL WORK OUT FINE, GOOD LUCK MATE!!!