316 86/87 M10 1766cc
Posted: Sun Oct 19, 2008 11:16 pm
Would this car use leaded or unleaded fuel?
Page 1 of 1
Re: 316 86/87 M10 1766cc
Posted: Sun Oct 19, 2008 11:41 pm
As long as the valve seats haven't been recut, it'll run happily on unleaded, whatever its original requirements were.
Re: 316 86/87 M10 1766cc
Posted: Mon Oct 20, 2008 11:16 am
Cheers for that! 
Re: 316 86/87 M10 1766cc
Posted: Wed Oct 22, 2008 9:13 pm
my 316 m10 had no problems on unleaded but never checked to see if been adjusted