E30 Zone

JonnyBravo wrote:cheers, glad you's like the photos

not many tech 1's about but i have to say that one was nice

Thanks.. Jonny..

My Sport is 4sale..... 07877933586

Hey Folks..

Could i have the link with instructions to cancel my service lights

Many Thanks...

red_beemer wrote:
i have a 318i on a H plate, what could i do to make it faster? without it costing a bomb?

http://www.diy-nitrous.fsnet.co.uk/

Hi all, im in need of some new front wings for my E30 and was considering buying brand new wings from GSF as there only Ãƒ”šÃ‚£25 each + vat. Has anyone used these before, are they a good fit or does any one have some rust and dent free briliant red front wings. Chris GSF wings for E30's are a Tota...

Motorhole wrote:Get a good CA18DET engine for about Ãƒ”šÃ‚£250-Ãƒ”šÃ‚£300

Don't bother with a s13 200sx motor.. Yeah i can hear the Big Ends knocking already...

Well finally got my carpet out of my tech 1 after stripping the interior out to investigate leeks/wet carpet. Good new is after romoving rear quarter card i can see that both rear inerer arches have been replaced probaly not long before i brought the car in 2003. Bad new is some real bad rust aroun...

kenwoir wrote: Most have english plates on them as they have been brought over from the mainland to begin with as mine was

Yeah i brought mine home from Lincoln 2yrs ago flight & boat cost less than Ãƒ”šÃ‚£100

Yeah i'll have to get some new pics taken and post them up..

JonnyDrift wrote:Im from Belfast.Theres a few others that i know of too on here.

Yeah me 2..

Hey Folks.. How much fun are 325i Sports??? I had my Delphin grey 87 Sport in proper dry storage for 2yrs & just before the new year i moved it into the main garage for a full service & check over.. Changed two rear brake pipes & ABS light was lit so cleaned the sensors, went to the mot & flew throu...

bigdek wrote: just make it myself ?

Use the curved part of a front wing, any car will do these make excellent repair sections for your inner arches

With the engine cold use a blow lamp to heat the sump around the drain hole, the alloy will expand and then unscrew the steel drain bung..

anyone know how 2 remove the shadowline trim below the rear p/s window.i dont want 2 bend it or remove the glass. Use some duct tape to protect the paint along the top edge of the 1/4 panel below the trim then with a thin isopon spreader to gently lever up the trim.. If the trim is very stiff use a...

Hi Folks..

Just fitted a new set of G-Max -40mm to a friends 325.
Lowered car back on it's wheels and there is not much change in ride height maybe 10mm?????

Delete Please..

Bullit if you explain how the abs light is coming on it would help us help you. Right... Does the light come on when you have the ignition on? Does the light go out when you start the car or does it stay on? Q1 Yes.. Q2 Light stays on.. I will check the sensors and clean the pickups.. Thanks Folks..

The ABS light stays on even when driving??

Hi Folks..

My 87 sport has been in storage for 18mths, i fired it up at the weekend and the ABS light is lit?

Any ideas..

Car is driving 100%..

Thanks...

Ok Guys..

I sorted the service lights with the piece of wire trick. Thank U..

My ABS light is lit? How do i sort this??

Cheers..

Hi Folks..

My 87 sport has been in storage for 18mths, i fired it up at the weekend and the ABS light is lit and the inspection light flashing??

Any ideas..

Car is driving 100%..

Thanks...

i dunno which back box to suggest, but a midbox like this helps alot. the difference after i cahnged it with the previous system was unreal. alot to do with restriction i guess. and the car "flows" alot better now generaly. http://img.photobucket.com/albums/v232/johnono/HPIM0437.jpg Plenty of black...

I bought some carb cleaner the other day and was just wondering where to spray it? ,lol Can take off the AFM at the tube elbow then spray it in there? Or spray into the air box above the filter? Dumb questions :D Adam You will need two people, Remove the airbox from the AFM and while reving up the ...

Sounds like it could be pressurising the cooling system a possible head gasket fault..

Try another rad cap first..

Yeah most Powerflow exhausts I have seen are made from low quality stainless and all have surface rust.. I have a powerflow on my Sport which I bought s'hand for Ãƒ”šÃ‚£50 :D and sounds real well great for Diff'n & Drift'n I have an HKS Super Dragger on my Teg R which is three years old and is still...

If you have disc's all round remove the pads and give the braking surface a scrub with 80grit sand paper to take the glaze off the pad then apply some copper grease to the backing plate face For rear drums chanver the two edges of the brake shoe lining with a flat file and blow any excess brake dust...

Have your paintwork scanned to get an exact match..

new rear quarters are needed, at a cost of Ãƒ”šÃ‚£1500 per side! :lol: FILLER!! :clin: The only way to Kill the tin worm is to cut it out! What are your inner arches like? Replacement arches are available from Ãƒ”šÃ‚£25, I have replaced the nearside rear arch on my sport and both on a mates red 320...

A female Spline socket or a 12 sided socket should fit,

redrobbie wrote:Yeh just the small rust spots.

What about a small whole, the size of 10p with rust around it. How would you fix that?

Cheers.

For a proper repair all rust must be cut away and a patch cut to size and welded in then primed, filled, painted and waxoyled on the inside..

How fast do you guys go around tight bends on the road?? for those of you who do go fast round corners do you expect the back to step out and correct it? Hell Yeah!! Full of the Rack Sideways!! Thats what a Sport is For!!! :rock: Just drive with care until you get used to it, (Find a quiet industri...

30psi for the 205/40 or 45's and 225/45's will fill the arches well at 32psi..

I run 225/45's on my Sport's Alpinas with no probs

320Touring wrote: use a towing bar (Ãƒ”šÃ‚£30) instead and have 4 wheels on the ground...

And someone to steer it!!

PM demonbiker

He has a complete dechrome set.. Collection only though from Cowdenbeth Scotland

Make a weekend of it!!!

I collected 3 Alpina reps from him last weekend and nice guy to deal with..

Adam

Glad you got it sorted..

Go for a genuine BMW Headgasket & Timing belt buy the rest from GSF they will be ok..

32psi

Search found 138 matches

Service lights.. Link to put them out??

Re: making my car faster!

Re: Any one used GSF front wings before

Re: Can of worm? rust?

Exhumed Sport

Re: rear inner arches

Re: shadowline trim

Lowering Springs (Bedding in)???

Delete Please..

ABS Light??

ABS & Inspection Light????

Re: Corroded Rear Wheel Arches

Re: Driving Round Corners