E30 Zone

hi guys just bought a set of aftermarket spark plug leads for my m40 1.8 they do not come with CID, my question is how do i fit the original CID to the new lead. i have also heard you can leave it disconnected , but does that affect the running of the engine or fuel economy .

Check ignition switch is actually switching off. Has it had any aftermarket wiring, alarm or stereo? they are prime suspects for incorrect connections. You do know the electric windows should work when the front doors are open, a comfort relay powers them up when the door is open. Thanks for the re...

Hi I hope someone can help I bought a new E30 318 Coupe,the problem I have is that when you remove the key from the ignition, the electric still work ,indicators lights radio, what should I look at first in my diagnosis process ,thank you in advance

Hi guys have striped a lot of parts of my e30 tourings due to ULez ,so if you need a part ask and I'll see if I have it

very

looking pair

those look well cool on that car , with those invisible tyres

just read this thread , has it been fixed ?

MOT says " a matched pair of lamps both emit light substantially the same colour and intensity.
In a four head lamp system the outer pair of lights need not emit the same colour light as the inner pair

check them good underneath moted a few looked nice from outside underside not so good

i wanted a cheap fuel efficient runabout from the 90s so i bought a 850i

check for cracking on the rubber intake boot, also check the hose that connects to the idle control valve for leaks

i am waiting to put strait through pipe with small back box , the video is with out resonator and back box cut off witch i done at work while the boss was out LOL, sounds much loader than in the video

they are very comfortable hold you in nice when going fast round corners.

have 2 m50 manifolds which iv had for a while now, am in the process of fitting to my black 328i e36 cab at this time will do the silver one after

cost £26.42 not including shipping from usa, £15.12 for standard belt from GSF. so if you fitted the Kevlar belt would the belt change interval be extended. and kevlar is used in making bullet proof vests so you could say my engine is bullet proof if you had the belt fitted LOL :mad: :shoot1:

jimmyspeed wrote:
@dmw - looks good, what are the vaders like

when i boghut the car it had a mint black vader interior witch i sold for 650 to someone who wanted to fit to a mk 2 golf.

then picked this gray set for 250 is ok just the drivers seat bolster is getting bad

nice i like the colour

this is mine

done, i only drive classics

Rav335uk wrote:Wrong offset.
I had this problem too.

but the other side does not rub and they did not rub on the other e30 could the track rods not have been fitted properly or are they thicker, will have to measure both cars track rods when i get time

swapped my wheels from one e30 to another started driving heard this grinding noise stopped looked at wheel and the track rod bottom was grinding against the rim but the other side didn't and had no problems with them when they wear on the other e30. any one had this problem

US spec. E30s use the same bumper as the rest of the world, but different rubber strips, with a separate bumper mounting plate. I've no idea exactly what they look like, or if they suit your needs, but possibly worth looking into. Seems strange to me as well that you've had damaged number plates. O...

macas wrote:You must be bloody unlucky to have had two number plates cracked!...i would leave it where it should be,it looks shit where you have put it.....

No offence intended,just my opinion

i like it

due to having 2 number plates cracked due to numpty drivers using my bumper as when to stop reversing when parking, iv moved the plate to under the bumper, is their a panel that covers the holes left behind or do i just fill them in and smooth it out. http://imageshack.us/a/img405/8092/e30j7dus.jpg

WHAT CAUSES HIGH HYDROCARBON

1. Improper Ignition Timing 2. Defective Ignition Components 3. Lean Fuel Mixture
4. Defective Catalytic Converter 5. Low Cylinder Compression

and other s**t i can not remember at this time

have the e30 version very good book

clarkson says e36 328i "goes and handles like a ferrari and rides like a jag"

you can cut a bit of the old strip to fill the gap. (I've done this myself.) This is what I normally do - cut a piece of spare strip to fit in either side of the shrunk one. Doesn't look bodged at all, as it gives the impression of being bits of corner trim. im a twat i chucked the old one in the b...

super project very

iv all was hated estate cars when i was joung, but love the bmw tourings

iv fitted one from stealers, easy to fit

nice car im looking for a 318 touring, to do an lpg converson on

couid you replace the rear glass with perspexs ? but then youll have no wiper or rear heated screen

Inner hex bolt M8X12 2 bmw part number 34111123072

Search found 32 matches

Cylinder Identification Sensor (CID)

Re: Car still has pover when key is removed

Car still has pover when key is removed

Scrapped 2 e30 tourings have some parts

Re: A weekend with my 2 black babies

Re: E36 bottletops

Re:

Re: yellow lights

Re: Time to buy a e36 M3?

Re: BMW E30' six pots actually chronically undervalued

Re: 328i running problems

E39 540I WITH BACK BOX AND RESONATOR REMOVED

Re: 328i sport

Re: Any experiences of these? Gates racing m20 timming belt

Re: 328i sport

Re: 328i sport

Re: Please sign this petition....

Re: mims 15 inch alloys hitting track rod end

mims 15 inch alloys hitting track rod end

Re: number plate delete panel

Re: number plate delete panel

number plate delete panel

Re: Failing emissions, high HC

Re: Great book....

Re:

Re: Touring rear door weather seal

Re:

Re:

Re: Touring rear door weather seal

Re:

Re: Rust proofing touring boot lid

Re: Disc brake retaining screw/bolt