E30 Zone

^ yep in my book. Also shows a lack of restraint (the cars position) rarely seen on the zone, or does your dads name start with Lord and that's his house? Thanks, i took it at hatfield house the day i brought the car. Asked the guard if he would let me into the front garden for some pics and surpri...

Any good?

Adam

L Shaped one if anyone has a decent one forsale?

not sure, its for my chromie 325? looks tshaped ish

yeh all seems fine

hmmm interesting, i think my idle isues are icv related gonna get a new one and see what happens

any one got an icv for sale

Oh dont worry, googled it

Is it worth checking the WOT switch under the throttle body too?

Hi mate have you got a picture of where the icv is situated?

So everyone always says the same thing about these, dont fiddle with the adjustment! However i have brought a number of second hand ones to try and find one that hasnt been fiddled with, but how can you ever be sure? There must be a set amount of turns out from fully in that is the factory standard ...

Hi guys, having a little issue with idle at the moment. When i start the car sometimes the idle dives up and down very uniformly from really low nearly stalling back up to 1600rpm? about 10 times (once a second very uniform) Does the same thing at traffic lights or junctions, all in the first 2-3 mi...

good thread, will be watching with interest as im in the exact same position

arrrrgggghh might just fit my old one back on then, if you do manage to get it on a gas bench what should the figure be?

Hi guys got a new (second hand) AFM and fitted it to my 1986 325i (Older high comp engine) engine doesnt seem to pull as strong since i fitted it and want to check that the co screw is set right, can anyone tell me how many turns out they should be roughly? I.e if you wound it all the way in and the...

Thanks very much

Hi guys im after one of these little rubber caps . . 72111929421

And a pair of new number plate light lenses/bulb holder for my 86' 325i

Thanks

thanks mate, all the pipes connected to the throttle body are like friction fit metal pipes, should there be like some sealant there cos they pop out easily?

Thanks

325i high comp

wheres that located, will have a look

Hi guys, having a little issue with idle at the moment. When i stat the car sometimes the idle will sit at 800 ish as it should but then go up and down very low like 5 times very uniformly? Does this sometimes at traffic lights aswell?

Any ideas?

Thanks

yeh i was on beujour (sp?) one of my mates had a red s13 200sx and the other had a focus? sounds like we were near you :) brilliant weekend i love le man! Im focusing on getting it up to scratch firsy by doing all these little bits then i need to lower it asap. Then gonna focus on the engine and per...

Ant supplied the chip for 120 and i fitted it to my current ecu so no cost there. Well worth it , pulls all through the rev range and really torquey mid range

Bit expensive for a chip but noone else does them for old high comp's.

really happy with the condition of the floor tho

I never got round to posting the chip install up so heres a few pics, and ANT if you are reading this the chip is amazing and it pulls so much harder now, i also got the CO set correctly today and its even better :) http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/284851_10150730608115204_694445203_20...

right will get cracking with these asap

that looks good mate, gonna give it a go today

got a mate thats handy with mig so could be done

My hands are fucked, my soul destroyed! but the carpet, is dry and back in the car! possibly the hardest job ive had to do ever on my own! The car is leak free spotlessly clean and fixed all the little problems, broken bulbs, tidying loose wires etc in the process! Happy lad now, thanks to all that ...

Ahhhh i see, right will crack on taking them FULLY apart then

how much do a decent set of sport mechs go for?

you sir are a gentleman!!! Took the plate off and the water is seeping through the grommet. Tiny tiny tiny bit of brown, sanding it down now, bit of silicone and bobs your aunt

Cheers buddy, pics soon

So i am outside working on the car now, and have stripped the car to find whats causing all the soggy footwells . . . http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/294578_10150791855760204_694445203_20773201_5384472_n.jpg Yesterday i was inside the car whilst a friend poured water over the car. It ...

That is all good and well, and is pretty much what i have done but struggled to find anything broken

Cool mate, if they are forsale pm me details

Took the worst offender (drivers seat) apart today as described above and could not see anything broken, put all back together with those screws that secure the backrest very tight! And it still wobbles bad as ever, seems to be movement coming from under the plastic hinge covers on the sides. Are th...

Looks good mate

thst looks awesome, is it homemade?

Search found 211 matches

Re: â˜…â˜†â˜… COTM e30's & something really BIG! â˜†â˜…ï

Re: â˜…â˜†â˜… COTM e30's & something really BIG! â˜†â˜…ï

Re: Afm Adjustment Definitive Answers?

Re: Afm Adjustment Definitive Answers?

Re: Afm Adjustment Definitive Answers?

Re: Afm Adjustment Definitive Answers?

Re: Afm Adjustment Definitive Answers?

Re: Idle Issue when cold!

Re: Idle Issue when cold!

Afm Adjustment Definitive Answers?

Idle Issue when cold!

Re: Engine changes.. what to go for!

Re: AFM Co Setting?

AFM Co Setting?

Re: 2 parts im after :)

2 parts im after :)

Re: Idle Issues

Re: Idle Issues

Re: Idle Issues

Idle Issues

Re:

Re:

Re:

Re: Dodgy seat mechs :/

Re:

Re: Dodgy seat mechs :/

Re: Quick help needed, leak solving!

Re: Dodgy seat mechs :/

Re: Quick help needed, leak solving!

Quick help needed, leak solving!

Re: Dodgy seat mechs :/

Re:

Re: Dodgy seat mechs :/

Re:

Re: