E30 Zone

What is better in your opinion and how can you tell the difference? As I'm looking for an engine at the moment, does the high comp have 2.5 2.7 stamped on the head?

Where are you getting 16" toyos for £50?? I'm paying £88 at my local garage I must be getting ripped off!

What's the tin worm?

When it arrives ill send you some pics, I was quoted £145 to have it polished to a mirror finish or £175 to have it plated. Which I don't think is too bad

Hi, I'm in the middle of renewing almost everything in my 325 and now thinking of uprating a couple of bits, where would you recommend I get stage 1 or 2 clutch, lightened flywheel and other performance parts from? The best websites, not eBay although its ok for some bits but most of the stuff on th...

I've sent my inlet off to be chrome plated at ashford chroming in Kent, hope they do a good job! I'm polishing the TB AFM and thermostat housing myself, dremmel, fine sandpaper and a lot of autosol does the job! takes a lot of time but well worth it when it's done

Point taken! Stock box and panel filter it is..Cheers saved me some coins

I have that set up on mine, for the front you will need at least 5mm spacer to keep it away from your brake calliper. And if you want to go low then it would be best to roll your arches as I haven't done mine and it done some damage to the arch When i lowered it, its on coilovers so had to raise it ...

I have borbet A's 9j all round on mine at the moment but they are just not doing it for me They look ok but not as good as bbs style rims. So I'm on a mission to get a set of these klutch rims or bbs rs if I can find any in my price range!

Anyone have these on their e30? Search them in google I think they are amazing and I want a set, just struggling to find anywhere in uk that sells them..what you think of them?

Would the pipercross viper induction kit be a big waste of money? If so what is the best to use in your opinion..

Hi, could some one tell me the correct part number for a 2.5 fuel injector as I have blue and green ones with different part numbers? They will be getting sent off to injector tune to be cleaned. Has anyone done this and was it worth it? Thanks..

16'' 9j borbet A's

What are your favourite alloys on an e30?

I've still got a lot to learn with the engine side of things yet but I'm getting there

I got myself a year ago and old convertible which needed a lot of attention, head gasket went not long after I got it so got this engine off a friend, replaced existing suspension with a decent set of coilovers, and had it re sprayed alpina blue as it was a bit of a rust bucket. Fair to say I rescue...

I'm new to here and to e30's as you can probally tell..

Yes I mean sport. I'll see how I get on after I have changed and refurbished the parts, cheers!

Fuel lines and injectors are getting done this week, have tested the temp sensor hot and cold seems to be fine. Hopefully after all this I will be getting more than 60 miles from £20! What should I be looking for from a 2.5s?

Ok will change that soon as then, how about the fuel pump-in tank type, not been changed. Sufficient enough?

When my engine was changed from a 2l to a 2.5s a couple of bits from the old engine we're used, as it didnt come with these parts-the inlet manifold, idle control valve and throttle body. It seems to run fine just very juicy would this be why?

This might help, On mine I've got 16'' 9j Borbet A's et15 all round with stretch 215/40 tyres on it I had to use 5mm spacer on front otherwise would hit the caliper

i want to give my m20 25 a good service, oil change already done when engine was replaced, new engine had done about 110,000 miles and not sure of its history, what else is most important and should be done with a budget of around 500-600?

lots of different makes out there, what works best for a 2.5 sport?

Hi, Is the 2ltr inlet manifold the same as the 2.5? Cheers

My e30 is slammed with borbet A's 16" 9j with coilovers sits perfectly but the camber it has now got is shredding the tyers in no time, might look the part but at a high cost!! Do not want to raise the car atall, have looked at camber adjusters on eBay but only find front ones anyone with any other ...

Ok thanks, what mpg should I be roughly getting from the engine?

Recently put 325 high comp engine into my e30 only had airflow meter and idle control valve from the standard 325. Are they any different? Getting very poor mileage from it at the moment. Any advise would be great. Cheers

On My 325 the temperature needle most the time sits just over half way, and sometimes up to the 3/4 mark..the stat has recently been changed any ideas what else it could be?

I thought there was something wrong, I will check that sensor thanks for the link. does get up to temp on the gauge but occasionally goes slightly over. It does smell like its running very rich! I dont know a great deal on engines yet so any advice would be helpfull. There is no oiler cooler fitted ...

I am getting about 55 miles out of £20 from the 325 sport engine i have just put in my e30. does this seem about right? Very juicy!!

Worth replacing standard air box and what for?

Search found 32 matches

High comp, low comp? 2.5

Re: toyo t1r tyres

Re: What mileages are E30's good for?

Re: Polished inlet/intake

Performance parts

Re: Polished inlet/intake

Re: What induction kit/air filter do you use?

Re: Borbet a's

Re: Klutch SL1 alloys

Klutch SL1 alloys

What induction kit/air filter do you use?

Fuel injector part number

Re: Favourite alloys?

Favourite alloys?

Re: Poor mpg..

Re: Poor mpg..

Re: Poor mpg..

Re: Poor mpg..

Re: Poor mpg..

Re: Poor mpg..

Poor mpg..

Re: looking or offset Flush look advise

A decent service..

what spark plugs?

Is the 2ltr inlet manifold the same as the 2.5?

E30's chronic rear camber..

Re: Air flow meter 325 sport

Air flow meter 325 sport

Overheating problem

Re: Mpg on a m20 325 high comp engine?

Mpg on a m20 325 high comp engine?

People's views on induction kit on m20 325?