E30 Zone

Sorry for gramer and spelling errors Typing is difficult in the dark LOL

Hi my question is: I have a b50b25 single vanos moter is my 325is e30. is it posible to swap a head from a m52 or s52 or s50 to maka more power, want to put on m3 ITB's. Will a head work that fits m50b25 block and can take duel vanos and ITB's. want to build a 2.5l moter that revs like an M3. planin...

hey iwas wondering how to swith off the ASC on my 525i the log book sais its the Limited edition moter sport aswel as the key took it to bmw and confirmed. I saw ASC malfunction in service history as its a pre owned. But i cant find the ASC switch. the car is sluggish in 1st gear WOT and pulls harde...

my 200 also has 7 main bearings. where can i uplooad pics and how ?

Not split ballbearing conrod. The conrod in conected to the crank via a split ballbearing instead of a bush tipe bearing. and the cranck is running on the same split ballbearings used on the conrods. the cams also use the same tipe. lots of moterbikes run on those tipe bearings. pull one apart and h...

Lol it was not cheap engen was biult by a verry well known bmw race specialist Cost was R56000 aprox 5600 pounds has been building bmw race moters since the 1960's for south african race teams. dont know weather or not its ported thats why im asking if a 885 head will work cuz of bigger valves and b...

9800k on the standard botem end sizes but cranck is running on a tipe of split ballbearings conrods aswell as cam, have low friction pistons all acordingly ballanced uses a difrent intake manifold with fenturies to spin the air and create a tornado effect through the intake ports. has the 200 head w...

so it is posible to put the 885 head on the 2.0 moter ? even with hi comp pistons it wont knock the valves ?

Hi i was windering. im curently running a m20b20 moter but it is race specked by robgreen engeneering in SA it reves to 9800rpm easy normally aspirated. hi comp pistons the works. Here is my question.. its got the 200 head on with small ports. can i fit the 885 head to it with bigger ports? and by h...

If you are running a 2.7 setup it is pointless fitting a welded 731 head !! rather find a 885 head with bigger intake ports and valves. cuz the 731 narrows to the same valve size as the 200. even if u do have the bigger manifold its going to be useless and ul have a slow airflow through the manifold...

ok so i finaly got my e30 back from the tuners after 4 months. said its the best they can do. running a stand alone engen managment system that replaces the airflow with a map sensor and uses standard crank pickup 60-2. so my problem is this. i put my foot down she runs line stink. but as soon as i ...

she is working like a charm again thanx a mil guys. cost me R2400 abt 240 pounds a bit harsh but got no alternative

ahh i see it ya. so just un plug it take it out and go order a new one then ? u think problem solved ?

no none what so ever. camshaft sensor being the one that meshures tdc on the cam ? or the senor on the cranck ?
is that all that coud make it this dead ?

sounds fine when u start it no noise from vanos just does not go. its got oil its got fuel checked the fuel preshure its fine checked the injectors all fine. what sensor could couse something like this ?

manual transmition

nope it revs like its pullung a ton of weight. slow but smooth

hi i have a 325i bmw the engen starts fine and drives but it has no pulling power. when i put my foot down it slowly edges forward. no smoke from the engen no warning lights. help plz

its a m3 evo it has the s50b32 moter the 321hp version. well so far i have bought titanuim valves and springs wiseco raised crown lightweight slipper pistons and rings hks conrods and had it all balenced with a hks counter weight crank shaft got a stage 4 AC sniczer cams updated vanos system delimit...

oldroydsr4 wrote:
Frany wrote: with out changeing the look of the moter. must look stock
What race series are you building it for? Sounds like someones up to no good.

haha non vishual mods is non vishual as the ruels clearly state. 6cyl N/A production class.

ok thought the s50 tapet cover would fit. . . damn what is the most power i can get with the s50b32 lump no turbo or nos. biulding it myself but doing some research before i jump in and change stuf. it is being built for the track. production N/A 6cyl class witch meens roll cage brakes and non vishu...

money is no object. want to biuld a N/A m3 e36 evo with as much power posible. any ideas to what i can do to make it a mid 9000 rpm moter ? with out changeing the look of the moter. must look stock

can a s54 head bolt straight on to a s50 block ? i have serched on the net and cant find a anser. i know both these moters are almost identical at the bottem and only difrence is the heads, can a swap be done for more power on a N/A moter ? anyone plz help

i took on a 2010 audi tt 3.2 quatro with my e12 m535i all i had was i 6into 2 into1 exhuast with branches a chip and a 278 cam with raised crown pistons. TOTaly got raped on pull away as i over did the power on launch but when the rubber took hold kinda left it standing from 100mph upwards. guy was ...

Hey all. i have a 323i but unfortunately its 4 stud hubs. i also have a e12 m535 late 82 model and a spare shell with wheels and all. just want to knw if i can put the bbs 5stud mags off the spear e12 and hubs on my e30 ?

i keep up with a 2door 325i auto 4 speed thats fit so im prety shure it has some m parts in it and all service history shows in my "m" 323i is its regular services. also had it on the rollers and it put out a healthy 121kw and 177nm torque. if im not mistaken the standard 323i developed 105 - 110 kw...

im thinking of the mtec 1 kit i kinda like the old school look but would prefer it with a manual trany. i bought the car in fair condition for 6500 rand. thats roughly 650 pounds it needed a torque converter seal and a batery to run cosmeticaly just a phew minor surface rust spots here and there. so...

im in south africa and i asked the local BMW dealers if there was a m323i or 323im and they said u could order a 323i with the m kit that included a m teck steering wheel either a 4 speed auto or 5 speed manual gearbox with a LSD 323 ratio and with a removed rev limiter but found no evidence on the ...

Can anyone tell me if a m323i 4door was made with a auto box ? and also can the later models tail lights eg 91 up wards e30 fit in a mid 80's shell. and can u put the plastic mtec bumpers on a chrome bumper model if so what do u need to do it. thanx

ive got nothing but time and im shure my old man can asist me. as of the money part il rob a bank or my moms purse hahaha thanx for the info

Hi everyone. im in need of some asistince. I am thinking of putting a s38b36 moter in my 320i 2door. Has it been done before because i did not see any topic on it and what do i need. Is it posible to put the 6 speed trany in as well and will a 323i LSD cope with the added power? any advice or asista...

thanx alot. im kinda a newbe so would u mind explaining to me where i find it on the car and where would i fit the sensor if i have a manual transmition ?

so a e30's tps sensor that has a outo gearbox would work as a progresive sensor? I tried useing the one i have and press the acselerator down but i get no reading only at full throtel do i get a 100 persent open reading. But as soon as i close it just a milimeter it shows a 0 persent reading. I thou...

knw the timely process but with time all comes together. busy biulding a e30 with a modded 850csi lump. wil post pictures soon

sorted the starting problem was the starter that was shot replaced it. but stil have the misfire when reving problem

Search found 38 matches

Re: M50b25 twin vanos

M50b25 twin vanos

1996 e34 525i single vanos ASC

Re: b28 with 885 head ?

Re: b28 with 885 head ?

Re: b28 with 885 head ?

Re: b28 with 885 head ?

Re: b28 with 885 head ?

b28 with 885 head ?

Re: 731 Head - Route to take

E30 rev problem...

Re:

Re:

Re:

Re:

Re: E36 325i no pulling power

Re: E36 325i no pulling power

E36 325i no pulling power

Re: s54b32 and s50b32

Re: s54b32 and s50b32

Re: s54b32 and s50b32

Re: s54b32 and s50b32

s54b32 and s50b32

e12 5 stud hubs on e30 ?

Re: e30 M323i auto 4door ?

e30 M323i auto 4door ?

Re: S38 swap

S38 swap

Re: m50 throtel body on a m20 manifold

Re: m50 throtel body on a m20 manifold

Re: just borrowing our quarantine for thread update

Re: Hi all in need of BMW help