E30 Zone

Hi.
Yes they are expensive. Look this for your questions. http://arp-bolts.com/pages/mfg_aerospace.shtml

Does anyone know less branded producer of engine studs?

DanThe wrote:Fitting those pistons to your engine will lower compression, if you are planning an engine build then you want a standard spec block

yes, but motorist advices to install cast-iron sleeve and hone them to piston size.
Also whatever another used block has own working defect.

I bought m50b25 engine and m54b30 pistons for stroke.
Block checking shows that it was honed to second repair (D=84.5mm).
What do you advice: installing block sleeve or changing block?
thnx.

last year topic picked up more then 20 users to produce the quick rack.
To arrange them again - no problem.

MrBenn wrote:I have one of the correct racks if this ever goes anywhere. PM me if you want it, I'm going a different route.

can you show the pics? And where it was producted?

hi there.

Asked today Quaife about produce the rack so they told they cannot done it.

"We can confirm that a sample rack was provided to us some months ago for quotation, but unfortunately after
inspecting the rack Is was concluded that we were unable to re-produce it."

have known from rallydesign.co.uk - they tell they are registered importer of OMP products and sell genuine OMP steering wheels.

hi

does RallyDesign supply authentic OMP whells? I'm going to buy http://www.rallydesign.co.uk/index.php?cPath=82_83 and looking for the best price.

Also plz advice adaptor for that wheel?
thnx.

rix313, where are you? Do you forget about us?

rix313, what are news from quaife?

hookedonboost, you asked to remove your name from list so i've done it and write down my name instead of yours) Let me know if you change your mind) 1. rix313 2. ross_jsy 3. mattrs 4. Scot 5. jbh 6. dsm2002 7. Motorhole 8. Craig 9. vladv (LHD version) 10. vladv (LHD version) 11. RobCallow 12. Jonnyg...

Guys, are you talking about springs at standard place without rear coilover unit.
I choose GAZ fr 500lbs and rr 375lbs for drifting all are coilovers units. Hope it will be Ok! for first time riding.

So what rack - Quaife or Z3 - will be better for drifting?

Will a max angel of wheels turning with Quaife rack be the same as stock?

I posted up at Russian and Ukrain forums. Hope will be some enthusiasts. I am in)

rix313, did you consider rebuilding of the powerstering racks? Why just manual?

And one more: sorry for my stupid question but if quife cut the teeth of the rack to make it quicker so I need to supply to them my donor rack to cut it, isn't it?

here is rebuilding of AE86 rack which my friend did. He bought rebuild kit from Quaife.

Stock contents are in bottom and the Quaife are above.

I thought the same. So:

1. rix313
2. ross_jsy
3. mattrs
4. Scot
5. jbh
6. dsm2002
7. Motorhole
8. Craig
9. hookedonboost
10. vladv (LHD version)
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

rix313 wrote:Ok email back from Quaife. They say they can do LHD racks too.

its great.
Will be donor rack needed to make quick rack or they can do new parts?

e21Jason wrote:The difference is in the rack internals not something you can see on that digram strip a couple of racks down and have a look

Jason

So are there any external differences to choose correct rack?

Hi I tried to do a group buy a few years ago so looked into this in detail early cars have a round rack bar which means quaife can cut the teeth, later racks are triangular so you cannot get the teeth cut. Jason Hi I tried to do a group buy a few years ago so looked into this in detail early cars h...

Does that kit fit to lefthand rack?

Here is a pic of them fitted http://i11.photobucket.com/albums/a155/Danharborow/rearbush.jpg Simply remove the lower supporting plate, push these into the bushes and refit the plate. Tools required - 22mm spanner, 5mm hex key and a jack, fairy liquid helps :) Clear) Don't need for powerflex bushes....

what for that stuff and how to install? Ebay link is brocken.

Keri, massivebrakes.com offers 300mm x 32mm kit suited to 15" wheels But not the standard 15" BBS wheels (which is what Keri is working with, as thats what most people want/have) - Be aware that the e30 318-325 kit requires race wheels with a lot of room behind the spokes (Kosei K1, Team Dynamics P...

Keri, massivebrakes.com offers 300mm x 32mm kit suited to 15" wheels vs WMS 300x26mm or 298.5x24mm suited to 16". For what they achieve that?
http://www.massivebrakes.com/kits/e30/f ... 32/318-325

S14 is my innermost dream)
Airbox really cool.
Was GAZ front strut welded?

Privet from Moscow) E30zone is going to be exUSSR zone)

Those are just casting numbers, and no real help in identifying the diff. There should be a metal tag under one of the bolts holding the rear cover on. If this is missing, take the rear cover off to identify if it's a slipper or not, and count the teeth on the crown wheel and pinion to determine th...

plz help me to identify my diff type.
I've found 3 number codes on the case.

Two sizes of diffs are fitted to E30,'small' has 6 bolts to the rear cover,and 'medium',which has 8 bolts to the rear cover. 3.45 was made in both sizes,although in the smaller case it was fitted behind the 324d engine! what type of LSD was installed on e30? I know AWD has visco-LSD but what RWD: f...

hi,
i found such numbers at diff case s6640. what are they mean?
I think its LSD diff but can you help to determine diff type: disk or torsen?
thnx.

I noticed the most coilovers are sold have softer front then rear. But for drift is prefered vice versa.
What advantages and disadvantages has harder front?

Search found 33 matches

Re: ARP HEAD STUD/BOLT KITS

Re: m50b25 block question

m50b25 block question

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re:

Re:

Re:

Re: Fast road spring rates

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Quaife quick rack feeler

Re: Rear subframe bush void fillers

Re: Rear subframe bush void fillers

Re:

Re:

Re: 2.3 s14 270 bhp

Re: E30 M40b18 from Simferopol Ukraine

Re:

Re: Diff tag identification

Re: Diff tag identification

Re: Coilover spring rates