E30 Zone

(PG325) I know its been a while but did you ever get this one sorted

Cheers guys, I've done this job now. Removed front bumper disassemble not an easy process, then sand, fill, sand and paint with halfords black bumper paint. The results look really good.

I'll save my £250 for something else.

Be interested to hear the outcome although you may be doing that in the snow!

Thanks, its only from cold which makes me think its not the injectors, I've also put a few bottels of injector cleaning fluid through as advised by my BMW specialist garage.

I have a very precise problem with my 1992 325i auto. Generally the car runs fine feels powerful and return OK mpg When cold the engine is hesitant on pick up for about a second as nothing happens. When the engine is warmed there are no problems. All the things listed below made only a slight differ...

Anyone tried the EPC ones, gonna have a go with the wet n dry see how I get on

I had my stock 15 inch BBS done last year and the results were impressive back to as new condition £200 + VAT company in Devon.

I have been looking around but found no definitive answer. I have a late 325i painted plastic bumper with rubber inserts.

Over the years the corners have become scratched brick walls etc, does anyone know how to get rid of scratches in the rubber?

Tempted to try sanding them then cutting compound.

Thanks for the reply, are you about to do this job or is it done be interested in the pics.

Whats the quality of the steel like gauge etc?

Anyone used any other panels they would recommend I heard a rumour that Schmiedmann panel were pretty good.

I'm looking to repair my rusty rear wheel arches on my cab. I don't want to cut out and replace the whole rear panel but this is the only part available from BMW now. I could cut just the arch out and use that but it seems a waste and very costly. Has anyone found a good supplier of pattern panels f...

My car is in the bodyshop some bits needed.

1992 325i cab

Rear arch inner and outer repair panels both sides

All four jacking points

Many thanks

I have exatly the same thing, the condensation thing was making look like the water was coming in past the lid seal. Replaced that no better. Did some digging around the lights and it's coming in there I thing. Got some new light seals hopefully that's a fix. I think the water comes in at lights exh...

You will need the two basic kits from Furniture Clinic one with the colours and one with the filler. That said you may just need a pot of flexible filler and some of their black dye. Clean and lightly sand the leather (fine grade paper). Then apply the filler with a flat bladed plastic tool. Sand ba...

Thought I'd do a quick post as with little effort it saved me allot of money. There are a few posts on the zone of guys using 'Furniture Clinic' products but generally the larger kits. They work really well. I used a couple of basic kits to repair and colour the leather, total cost £44 enough to do ...

My car... 92 325i cabby

Sill strips external both sides
Rear light cluster sealing rubbers
Washer bottle and lid - single bottle.

Many thanks

Thanks for the info guys, I'm willing to travel for the right standard of work. Cheers

I'm taking the plunge and getting the rear wheel arches replaced on my E30 cab, along with some other bit and pieces.

I live in Exeter and I am looking round for a company/garage to take on this work do a proper job and not charge the earth.

Anyone have any recommendations?

Thanks in advance

Great to deal with, lenses turned up on time and in excellent condition

Prompt payment, pleasure to deal with, cheers

Thanks for the quick reply, water comes in to the middle of the boot (I park on a slight hill). I can see where it comes in over the seal between seal and metal rear of the top boot seal. Odd one.

I have a leaky boot, I know its a common problem but this may be a bit different. I know water is coming in past the boot seal, between the rubber and the boot lid. I have replaced with new BMW rubber but not change, the seal seems tight and I have adjusted the catch. Its not particularly rusty no h...

Search found 21 matches

Re: TPS and from cold pick up

Re: Scratched rubber bumper inserts

Re: TPS and from cold pick up

Re: TPS and from cold pick up

TPS and from cold pick up

Re: Scratched rubber bumper inserts

Re: Reasonable wheel refurb price?!

Scratched rubber bumper inserts

Re: Quality pattern panels

Quality pattern panels

Bits needed to replace rusty rear arches

Re: Condensation in boot of Cab

Re: Ripped and cracked leather seats - my fix

Ripped and cracked leather seats - my fix

Prices needed if poss

Bodyshops in the Southwest

Re: clips

Re: sunroof

Re: Leaky boot seal - help needed

Leaky boot seal - help needed