E30 Zone

16x 51712239734

12× 51121867907

16x 51162239735

9x 51712239736

6x 51711938940

4x 17111712963

2x 41335480120

2x 51712239899

All relating to mtech 2 kit hardware

TIA

Mr Moore the messiah 😎👍 The headlights are off at the moment... but did recall when the head lamps were connected that the dip beam was dim on parking lights on and brighting up on dip head lamps where put on... Hopefully thats sorted, will comfirm once i put the lights back Yh the fused Bat wire is...

Wiring guru's Finally got my other E30 back , which has been converted to a M30 turbo, will be taking it to the workshop NX week for various issues and checks First issue Havin issues with headlights... when position light are on the headlights turn on On low beam relay pin 85 is earthed for the rel...

Sorted

If it doesn't affect the view of THE ROAD(the actual road itself ) then it want fail MOT . Regardless of the swept area of the blades.

Thanks

Iv gone with dexron 3

what's the best automatic fluid to use?

Manual says dexron 2? But there's dexron 2d,2e,3 and 6

Also ways of removing the complete fluid without removing the gearbox. Or its the question of drain, fill,drive,drain and fill a few times.

Thanks

+1 on drive shafts. Can you Pm with a approx price with or without groupbuy price and what power they can take.

maxfield wrote:I can't for the life of me recall what it's called.

But I have changed a few of these due to them causing idling issues.

I think either crankase ventilation valve
Or oil separator valve

Individual coils will most likely provide a better(stronger spark). If you are referring the six bank coil pack as a wasted spark one, then you will save some money and space

All in all I don't think there's much of a difference

Dan_556 wrote:if running a MAP sensor does that eliminate the MAF?

Yes

majority of the aftermarket ecu come with a built in MAP sensor in the ECU. Just need to run a vacuum hose from the ECU to the manifold.

60lbs injectors Should do pending the size of your turbo, Management wise you can get a plug play VEMS ecu which Gunni on here does, or a plug play Megasquirt ECU.(USA best place to look IMHO) Extra sensors and other things should be need which are- Wideband sensor(lambda) Boost pressure sensor IAT ...

Have tried http://ergen.co.uk/product.html/

He is a member here as well

I had the same thing when doing my arms. I think it's some type if waxy oil. To prevent the arms rusting inside out as they are hollow

Iv bought the TCD kit, the waste gates are TIAl. The turbo brand is COMP turbo, injectors they use are seimans Mine was for m30. I needed to get angled bracket made, for the turbo housing. To take the turbo away slightly from the rocker cover,as I was having clearance issues. Iv opted for a tubular ...

UPDATE 29/09/2013 ENGINE IN !! Finally some progress. From the previous update i had the vehicle at the workshop ready for welding. i had a new battery tray put in and the fusebox mounting area rust cut out and new plates welded in. Once that was done i had it towed back home. (Pics will follow once...

Can drive shafts be replaced with out moving the diff?

Regarding the coil pack connection.

I'm running a wasted spark coil from a vauxhall and I got the connection from here.

http://polevolt.co.uk/acatalog/Junior_P ... ctors.html

Make sure you get the pins , rubber seals aswell(last few items on the page )

Jamie8GTi wrote:Did you buy wilwood through him? I messaged him about the WMS brake kits, just waiting on a price at the moment

They wernt willwood but something very very similar

I got my front and rear kit from KERI-WMS. Who's a member here

http://www.e30zone.net/modules.php?name ... c&t=209737

Finally got the car to the workshop and removed the dash board ready for welding tomorrow afternoon. [img] [img]http://i1108.photobucket.com/albums/h404/sag1231/Bmw%20e30%20restoration/20130503_201948_resized_zpsf63ddcf5.jpg[/img] [/img] [img] [img]http://i1108.photobucket.com/albums/h404/sag1231/Bm...

Rav335uk wrote:Did you get a GOOD discount form ECP

NoT sure? as my mate sorted it out, who just started working for ECP last month. The coil was Delphi and TPS was a vemo one. I'll let you know the price once I get the invoice

Ill be sending out the loom next week to Gunni for him to wire it up to the VEMS ECU. Ill be using a m50 Throttle position senor (new from ECP), with a custom bracket ordered from the states to allow fitment and be using a wasted spark coil pack from a vauxhall omega v6(new from ECP). [img] [img]htt...

update 28/04/2012 Its been year since this project started and its no where near complete.( at least a 2-3 months away). I think i totaly under estimated this project, here was me thinking 6-8 months max. :o:. How wrong was I!! Any way since the last update, not many things have been done, i came do...

I think you will need to remove the prop centre mount bolts, so you will have enough slack on the prop shaft to lever out from the diff flange

Im need of a part number for a m50 throttle position sensor

Also if any one is selling one

TIA
Sag

This: http://www.uucmotorwerks.com/dssr/XTS1.jpg http://www.nexternal.com/uuc/articles/SSK-DSSR.htm That's the fella! But 350 dollars? :mad: I can replace with BMW bits at least 5 times for that figure,that's every three years or so,so I would need to keep the thing for at least 15 years to see a s...

Is the chip within the swept area of the wipers when on

https://www.gov.uk/check-mot-status-vehicle

Go on the above link with your reg and MOT test number to check if it's on the VOSA database

Wow ZONER from harrow. I thought I was the only one. What part of Harrow ? Pm if you want

Gert_8 wrote:
Kedge, how/where did you see the carpets?!

Zoom in on The picture Where you Can see the passenger side footwell. The carpet has been pulled back at some point or the moulding has come off

I'm doing a m30 turbo conversion at the moment, have a look on the turbo section.

What sort of power levels you want to reach?

You can get e30 specific mounts, Either base mounted or side mounted(cobra only to my knowledge) I had Newish cobra seats when I bought my e30 which came with e30 specific mounts from cobra. Which I sold

The seats which I have currently , has had the O.E frames welded on

Well done mate!

Pics please of the conversion.

Info on engine work. In the sense of comp ratio, internals, what type head gasket etc

Not much of a update as such I've spoken to GAZ they said approx £30 a corner for a service and plus more if any repair work is needed. Far as I'm aware I'll need two rear shocks need doing as they are leaking. But I'll send of all four,hoping the two front ones are straight forward service. A sight...

Search found 189 matches

Price please

Re: Head light issue

Head light issue

Re: Consolidated E30 Dismantling Thread - 316i to 325i Sport

Re: Cracked screen

Re:

325 automatic fluid type which one?

Re: Stronger driveshafts?

Re: Oil trap ?

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: M20 turbo parts help

Re: bmw-ecu-tuning - On Ebay

Re: Fluid inside trailing arms

Re: TCD M20B25 Turbo kit, what will work on RHD? Any other K

Drive shaft change

Re: My turbo project

Re: Wilwood Brake Upgrade.

Re: Wilwood Brake Upgrade.

Re:

Re: Diff removal help

m50 tps part number required

Re: Polybush/Delrin bushes for gear shifter

Re: Is this MOT fail? Windscreen

Re: Decent e30 Mechanic needed in around London

Re:

Re: m20b35 engine, turbo questions

Re: bucket seats?

Re: M30 Eaton M90 supercharger