E30 Zone

ive got a 1989 e30 316i engine with 50k on it . is it any good to anyone. its near complete i had to cut the loom plug off for my m52 conversion

ive got 17x8 with 195/45/17s on them and had no signs of buckling so far.

As anyone put a 2nd radio in the glove box I don't really want to remove the standard one.

If I was to use a 2.8 box would I sill be able to use the m20 clutch and flywheel as I didn't really wana dual mass and would I need to. change the prop

If I was to use a 2.8 box would I sill be able to use the m20 clutch and flywheel as I didn't really wana dual mass and would I need to. change the prob

Sorry my fault its a 316 shell but its got a m52 b25 In it with a 1.8 gearbox untill I get hold of a 318is box. I wasn't sure if the drive shafts would bolt up and etc

Hi. Ive got a 316i would a LSD off a 1989 e30 m3 fit onto it and as any1 got a idea what ratio they are. Cheers Andy [/quote]

Hi everyone . I've got a 316i with a m52 in it but I need to up grade the brakes . I know someone with a set off a 318is would these be alright to use or would I be better of getting some off a 325 or any other idea.

Might have to pay you to remove the ews from it.

Ye ur right my plugs are dry so gotta be the ews then . Best go back over my wires again.

Would that just stop the spark or the fuel aswel it turns over and there fuel.

Hi. I've just put a m52 in my e30 . I've done the wiring my self and I've sill got the ews it turns over but got no spark at all. Am gessing its down t the ews but all looks fine.

Maybe I've got it wrong. I've got a m20 flywheel 2.5 one and it needs lightening to fit but when I as at a BMW breakers in Derby I notice a 320i flywheel on the side and its not as thick as my 2.5 one. He had about 5 2.0l ones all the same . I will go and check in 5 mins

Cheers mate. I will get on eBay now.

Will it need to be lightened as I've got a 2.0 and a 2.5 one and the 2.0 one bolts on with no probs

Can I use a m40 starter motor or m52 one when using a m20 flywheel or will I have to buy a m20 one to match Cheers [/quote][/code][/b][/i]

Thank you. I had forgotten about the rad and thanks for clearing up where the rest of the ews lives I couldn't find it.

Hi. I've got a e30 316i 1989 and I've got a 1997 e36 for the engine. Ive got to get rid of the e36 this weekend just just want to make I've taken off everything I need or can use. Any Tips or ideas welcome. Taken off so far Engine and gearbox with props Engine loom Steering rack with pipes Air box E...

hi, is any one breaking a 6 pot e36. i need a gearbox mount(the alloy part) and a gear stick linkage.mayb a lambda sensor aswell. ive booked a day off today so if anyone can help could you let us know plzzzzz.

hi, i keep seeing e36 with the bmw number plate plinth does any1 know how much they are from bmw. just out of interest.

when i pulled the coil packs out the first time 3 of the plugs was covered in oil could this have something to do with it and does any1 know why it would be covered in oil. cheers

when i pulled the coil packs out the first time 3 of the plugs was covered in oil could this have something to do with it and does any1 know why it would be covered in oil. cheers

ive been offered a set of coils out of a p reg 328i will these fit my m50 325i.cheers

ive been offered a set of coils out of a p reg 328i will these fit my m50 325i.cheers

hi, ive got a e36 2.5 m50 engine it was fine i give it new plugs and filters, oil etc. but the day after it ticks over fine but seem to be holding back and have a missfire when on load.ive Had a look over everything seems ok ive have a look at the coils and number 2 was down so bought a new 1 then n...

hi, ive got a e36 2.5 m50 engine it was fine i give it new plugs and filters, oil etc. but the day after it ticks over fine but seem to be holding back and have a missfire when on load.ive Had a look over everything seems ok ive have a look at the coils and number 2 was down so bought a new 1 then n...

Derby mate. ive sorted a bonnet out thanks to ebay lol, i also got hold of a front panel and bonnet hinges and some bits of trim, just in need of a drivers wing ,headlights,front bumper, crossmember and splash shields. i forgot to try and ring the Quarry today the road trip to portsmouth for the bon...

cheers mate i will have a look now , bmw want £1025 just for a front panel and £800 for a pair of headlights

could anyone help me where i could get some z4 parts from i need a front end as my dads damged his one where tryin to get parts and not having alot of luck.cheers

hi, could any one tell me what oil does my e36 323i m52 engine need. thank u

i was going to just use a e30 one as i didnt think it was that bad. if i buy a e36 rack then what steering linkage do i need to use and could i get away with using the standard e36 power steering pipes. cheers for your replys

what power steering pump do i use do i use my e30 one or use the one on the m50 engine am using the nomel e30 rack.cheers

my cab one dont work i will have a look at the prongs

dont knw if its any help to ya,but when both of mine stop working it was just one of he fuses had gone.

if i was to use the m20 gear box would i be able to use my prop shafts or would i need to change them and am using a e34 525i auto engine if i was to use my m20 gearbox what spigot bearing would i have to use. . thanks for everyones help.

Search found 261 matches

316i with 50k engine worth or any good to anyone.

Re: Anyone running dare rs wheels?

Re: 2nd Head Unit Mounting Options?

Re: will a e30 m3 diff fitting on my 1989 316i

Re: will a e30 m3 diff fitting on my 1989 316i

Re: will a e30 m3 diff fitting on my 1989 316i

will a e30 m3 diff fitting on my 1989 316i

e30 brake upgrade

Re: no spark on m52 into e30

Re: no spark on m52 into e30

Re: no spark on m52 into e30

no spark on m52 into e30

Re: 1988 bmw 320i m50 swap!.. new to forum help.

Re: m40 starter motor or m52 one when using a m20 flywheel

Re: 1988 bmw 320i m50 swap!.. new to forum help.

m40 starter motor or m52 one when using a m20 flywheel

Re: just a few questions about what i need off my e36 donor

just a few questions about what i need off my e36 donor car

hi, is any one breaking a 6 pot e36. i need a gearbox parts

e36 bmw number plate plinth

Re: m50 misfire can any1 help.

Re: m50 misfire can any1 help.

Re: m50 misfire can any1 help.

Re: m50 misfire can any1 help.

m50 misfire can any1 help.

m50 misfire can any1 help.

Re: hi, am in need of some z4 parts can anyone help

Re: hi, am in need of some z4 parts can anyone help

hi, am in need of some z4 parts can anyone help

what oil does my e36 323i m52 engine need.

Re: what power steering pump do i use

what power steering pump do i use

Re: ciggerette lighter not working

Re: Just another cluster issue - RPM & MPG dead

Re: can i use my m20 325i gearbox