E30 Zone

I have one off a m3 e30. Will be for sale very soon!!!

Being rebuilt this week!

Just dome this conversion.. Took me 2 days all in all.... Only thing left now is to do the Exhaust! :-x Good thread! Helped me anyway :wink: Had to also change the ARB on mine.. Thought id mention it incase anyone else has the same thing, then engine sat on the old one... The 328 one is much lower.

moved it as far foward as i could!

But its not preloaded just in the position its sits at.

Dunno what else to do!

never took it off the prop, so im guessing ye

Right, Fitted prop after changing diff to large case, slacked off the bolts that hold the center bearing and the large one so the prop length can change. When i let it sit natuarally there is no adjustment to push it foward to preload it as it is already at the end of the slider before pushing it fo...

SPADGE wrote:Do not block it off whatever you do!
You fuel tank will not be able to breath and will apparently suck itself inside out

I was gonna block the bit on the throttle body not the pipe

all done now,

Blocked the throttle body and vented the other bit out the back!

Why do you say that?

Think ill have problems if i dont?

got a pic of ur engine / throttle body then??

If urs has no outlet, ill block mine!

On the throttle body, there is a pipe going to the carbon filter, do i block it up or put a filter on it?

Right i have the pipe which goes from the rear (near tank) to the carbon filter thingy under the bonnet. and 1 pipe from this out to vent and 1 to the THROTTLE BODY.

Ive removed it all, so should i block the pipe going in(or out) of the throttle body or leave it open

is the 4.1.1 not as low as the 4.45

i aint got a clue how these work!

whats next after 4.4|??

what is the lowest possible ratio diff for an E30???

need one for pulling away not top end"

Well if e36's are banned from here stop nicking the engines out of them and puttin them in ur cars!!!

we not allowed/??

Its actually for an E36 compact with the M42 engine

Reason is that its a PADDLE CLUTCH

is a cluch in an m42 the same as a m40??

Cheers
tom

dunno where to post this

How hard are complete s14 engines to find??? ideally with all bits and wiring to fit into an e36 COMPACT.

What sort of money are they???

also 205 challenge / bmw challenge website

seen a fair few go on ebay

Brianmoooore wrote:Propshaft length and preload should always be set up after a diff change though.

HOW DO I DO THIS

When swapping from a small case to a big case diff, do u need to change the shafts???

As the diff is wider??

or will it still fit the same shafts?

does anyone know which version IS the strongest?

anyone know which are the strongest?????????

are all the e30 shafts the same???

Inc m3's???

Rear 2 drive shafts i mean, not the prop

Search found 27 matches

Re: How rare are 4.10 LSD

Re: E36 Engine Swap (1.6 - 2.8)

Re: Preloading the prop problem....

Re: Preloading the prop problem....

Preloading the prop problem....

Re: 318IS M42 fuel breather pipe, filter thingy etc HELP

Re: 318IS M42 fuel breather pipe, filter thingy etc HELP

Re: 318IS M42 fuel breather pipe, filter thingy etc HELP

Re: 318IS M42 fuel breather pipe, filter thingy etc HELP

Re: 318IS M42 fuel breather pipe, filter thingy etc HELP

318IS M42 fuel breather pipe, filter thingy etc HELP

Re: lowest ratio diff?

Re: lowest ratio diff?

lowest ratio diff?

Re: M40 and m42 clutch??? the same??

Re: M40 and m42 clutch??? the same??

Re: M40 and m42 clutch??? the same??

M40 and m42 clutch??? the same??

e30 S14 Engine??? hard to find? how much??

Re: Where to buy a cage?

Re: Where to buy a cage?

Re: GOLD alpinas!!! (56k hmmm maybe not)

Re: Swapping Diff???? shafts aswell?? Bid to small Case diff

Swapping Diff???? shafts aswell?? Bid to small Case diff...

Re: e30 shafts??? all the same? inc m3

Re: e30 shafts??? all the same? inc m3

e30 shafts??? all the same? inc m3